Go to... | Start A New Topic | Search | Notify | Tools | Reply To This Topic | |
| 93 Regency heater control cable | Login now/Join our community |
 3/11 |
Hi folks: My heater control cable is frayed and I am looking for a replacement. The dash slider unit looks like a GM but the Barth information does not identify it. Has anyone replaced this cable and found out a part number? Thanks, Tom 93 Regency 32ft 300 Cat on Gillig Chassis 1993 32' Regency Wide Body, 4 speed Allison Trans, Front Entry door, Diamond Plate aluminum roof & 1981 Euro 22' w Chevy 350 engine and TH 400 tranny | ||
|
 2/16Captain Doom  |
My Breakaway has a Chrysler HVAC system. Rusty  "StaRV II"'94 28' Breakaway: MilSpec AMG 6.5L TD 230HP Nelson and Chester, not-spoiled Golden Retrievers Sometimes I think we're alone in the universe, and sometimes I think we're not. In either case the idea is quite staggering. - Arthur C. Clarke It was a woman who drove me to drink, and I've been searching thirty years to find her and thank her - W. C. Fields | |||
|
| 3/11 |
Rusty, does yours have push buttons with a slider on the top and a vertical fan speed lever on the right side? If so, would you have anything that identifies it by model or number and year? Thanks 1993 32' Regency Wide Body, 4 speed Allison Trans, Front Entry door, Diamond Plate aluminum roof & 1981 Euro 22' w Chevy 350 engine and TH 400 tranny | |||
|
| The Old Man and No Barth |
That sounds lke a typical Chrysler panel. I've got the same. If your problem is the wire that controls the hot water flow, I replaced mine with a generic from the auto parts store. | |||
|
| 2/16 Captain Doom |
That sounds like it - for vent only (no A/C) one pushes then pulls out the A/C button. I don't have any info on it, but it does sound like the cable would be easy to replace by measuring the length or taking it to a parts store. Rusty "StaRV II"'94 28' Breakaway: MilSpec AMG 6.5L TD 230HP Nelson and Chester, not-spoiled Golden Retrievers Sometimes I think we're alone in the universe, and sometimes I think we're not. In either case the idea is quite staggering. - Arthur C. Clarke It was a woman who drove me to drink, and I've been searching thirty years to find her and thank her - W. C. Fields | |||
|
| 3/11 |
Here is an update on the cable - there are no suitable aftermarket cables and the local Chrysler dealers could not trace a good number. I found a web vendor who replaced the inner cable in my original housing. He is at http://www.rayeveritt.com If you need a cable check this out. Tom 1993 32' Regency Wide Body, 4 speed Allison Trans, Front Entry door, Diamond Plate aluminum roof & 1981 Euro 22' w Chevy 350 engine and TH 400 tranny | |||
|
1/21 |
My 94 Regency with the 300 Cummins has a Chrysler push button unit that is interchangeable with mid to late 80's Dodge P/u trucks. Try your local junk yard and you'll see what I mean. They should have a cable since most "pullers" are looking for the push button assembly. Frank Strong 1994 Regency 34ft 300 HP Cummins, 6 spd Allison Spartan MM Chassis | |||
|
| Powered by Social Strata |
 | Please Wait. Your request is being processed... |
|
This website is dedicated to the Barth Custom Coach, their owners and those who admire this American made, quality crafted, motor coach.
We are committed to the history, preservation and restoration of the Barth Custom Coach.
We are committed to the history, preservation and restoration of the Barth Custom Coach.
