Barthmobile Portal
Wiring Schematic

This topic can be found at:
https://www.barthmobile.com/eve/forums/a/tpc/f/3731087061/m/4611093272

08-17-2007, 12:09 PM
sky
Wiring Schematic
Does anyone have a wiring schematic for a 1990 Barth Regency 32RDG with a gillig chassis for the drivers side electric bay and dash. I have some elctric bleed over from the headlight switch and horn relay. Thanks. Sky


1990 Barth Regency
32RDGB1 Wide Body
3208 Cat 250 HP
Gillig Chassis
Center aisle
08-17-2007, 09:06 PM
garryp
Sky, what do you mean by 'bleed over'?
08-18-2007, 07:02 AM
sky
I have a short some where, when the lights are on and the engine is running, the air horn will sound without pushing the button and the flashers will start flashing. The electronic flashing module was cracked and had shorted out, I have repalsced that, but still have ing problem. Could light somewher short this out or maybe a vacuum pump?
Sky


1990 Barth Regency
32RDGB1 Wide Body
3208 Cat 250 HP
Gillig Chassis
Center aisle
08-18-2007, 07:04 AM
sky
Hi Gary, How have you been? You remember Anne and I?
You came over and visited with us last summer. Take care. Sky


1990 Barth Regency
32RDGB1 Wide Body
3208 Cat 250 HP
Gillig Chassis
Center aisle
08-19-2007, 03:59 PM
sky
Found the problem!!!!!!!. Just a loose ground wire terminal.
Bill NY, read a earlier p from you about the ground connections and checked that. Thanks a lot everyone. Appreciate all of the ideas from the forum. Sky


1990 Barth Regency
32RDGB1 Wide Body
3208 Cat 250 HP
Gillig Chassis
Center aisle