Barthmobile Portal
Failed wiring and how to protect against it. FYI...

This topic can be found at:
https://www.barthmobile.com/eve/forums/a/tpc/f/3631087061/m/9741027261

05-27-2007, 08:02 PM
Rusty
Failed wiring and how to protect against it. FYI...
IIRC, the Western Union splice is designed for wires that are both self-supporting and solid core.

Wires on the motorhomes should be neither - they should be stranded and be supported every couple of feet. Heat-shrink tubing resists flexing, the worst strain a double-J can have. The double-J also requires the least amount of wire to do - quite useful where there's little slack.

IMHO, any properly-soldered splice is better than using a wire nut.


Rusty


MilSpec AMG 6.5L TD 230HP; built-to-order by Peninsular Engines:  Hi-pop injectors, gear-driven camshaft, non-waste-gated, high-output turbo, 18:1 pistons.  Fuel economy increased by 15-20%, power, WOW!"StaRV II"

'94 28' Breakaway: MilSpec AMG 6.5L TD 230HP

Nelson and Chester, not-spoiled Golden Retrievers

Sometimes I think we're alone in the universe, and sometimes I think we're not.
In either case the idea is quite staggering.
- Arthur C. Clarke

It was a woman who drove me to drink, and I've been searching thirty years to find her and thank her - W. C. Fields