Start A New Topic
Reply To This Topic
wondering if anyone has a recommendation for a pair of tire ramps that will handle Barth weight.. I want to be able to drive an inside rear dual up so the outside dual will be up, off the ground for work or change..
Saw these, Tire ramps..
comments and/or other recommendations appreciated..
2nd question: what RV roadside assist program for tires do you all have..?
1991 early XL-style (maybe 1 of 2?) Breakaway... but prior to that actual (XL) designation...
2nd Breakaway w/Cat 3208T 250 hp motor 4 spd MT643 Allison trans Gilig Air suspension chassis/brakes
Data Tag: 9010 3694 34-BG-1B
When looking myself did not find a viable set. Made my own from two 4x4's and a removeable 2x8 for extra height if needed. Had them for years through 3 RV's. Put a stop on the 2x8 to prevent slippage. Saw a similar set and copied it from a GTG in Ohio. Use them both front and back.
1971 24 ft Barth Continental
|Powered by Social Strata|