Barthmobile Portal
Breakaway wheel well trim

This topic can be found at:
https://www.barthmobile.com/eve/forums/a/tpc/f/3631087061/m/7893960877

04-15-2013, 09:30 AM
Terry Gilbert
Breakaway wheel well trim
Does anyone know where to get new wheel well trim for a 1991 Breakaway? I had to drill out the rivets to remove mine for repairs I am doing inside the wheel wells & I will put on new if I can find it. The old pcs are corroded where the steel & aluminum meet.


Terry
1991 30 ft Breakaway
160 HP Cummins 4 Speed Allison
04-19-2013, 10:40 PM
Terry Gilbert
Picture of trim


Terry
1991 30 ft Breakaway
160 HP Cummins 4 Speed Allison
04-19-2013, 10:43 PM
Rusty
That looks like standard aluminum bar stock, bent 90° in a metal brake, then cut to allow a bend.


Rusty

MilSpec AMG 6.5L TD 230HP; built-to-order by Peninsular Engines: Hi-pop injectors, gear-driven camshaft, non-waste-gated, high-output turbo, 18:1 pistons. Fuel economy increased by 15-20%, power, WOW!"StaRV II"

'94 28' Breakaway: MilSpec AMG 6.5L TD 230HP

Nelson and Chester, not-spoiled Golden Retrievers

Sometimes I think we're alone in the universe, and sometimes I think we're not.
In either case the idea is quite staggering. - Arthur C. Clarke

It was a woman who drove me to drink, and I've been searching thirty years to find her and thank her - W. C. Fields
04-19-2013, 10:43 PM
Terry Gilbert
quote:
Originally posted by Terry Gilbert:
Picture of trim



Terry
1991 30 ft Breakaway
160 HP Cummins 4 Speed Allison
04-20-2013, 06:02 AM
Tom and Julie
Take it here: http://diversified-metals.com/ and have it made out of stainless and you will never need to do it again.


1993 32' Regency Wide Body, 4 speed Allison Trans, Front Entry door, Diamond Plate aluminum roof &
1981 Euro 22' w Chevy 350 engine and TH 400 tranny