Barthmobile Portal
Need storage door latch
07-28-2012, 06:39 PM
Fred & CindyNeed storage door latch
Wonder if anyone can tell me where I can get a basement door latch for my 1990 Regency 32' Diesel. I had one that recently broke. I believe is is common for many Barth's as the photos may indicate. Would appreciate any help. Thanks!
Jax
1990 32' Regency
1990 32' Regency, Wide Body
Spartan Chassis, 8.3 CTA Cummins
4 Speed Allison Trans
South Central Missouri
07-28-2012, 08:07 PM
Bill N.Y.We're looking at the backside here...
There are typically 3 different ones.
Click this link to figure out which one you need.
˙ʎ˙u ןןıq- „ǝןƃuɐ ʇuǝɹǝɟɟıp ɐ ɯoɹɟ pןɹoʍ ǝɥʇ ʇɐ ʞooן ɐ ƃuıʞɐʇ sı ǝɟıן oʇ ʇǝɹɔǝs ǝɥʇ„
|
 | 1990 Barth Regis Widebody 8908 0128 40RDS-C1 L-10 Cummins Allison MT647 Transmission Spartan Chassis |  | 1991 Medical Lab Conversion 9102 3709 33S-12 Ford 460 MPFI C6 Transmission Oshkosh Chassis |
Quick Link: Members Only Link To Send Me A Private Message |
07-28-2012, 10:10 PM
Fred & CindyHere is the front side. Also took photo of the key. The shank looks to be about 3 inches long and it is threaded. Another piece is attached with a nut on both sides making up the latch. I need both as they are broken off. It is entirely aluminum.
Thanks!
Jax
1990 32' Regency, Wide Body
Spartan Chassis, 8.3 CTA Cummins
4 Speed Allison Trans
South Central Missouri
07-29-2012, 12:29 AM
Medic37If you are saying that the pawl is broken, you will not be able to get that part from SouthCo.
The Pawls that come with the latches are very different that the one you have "pictured".
I am guessing that these were made by Barth.
I replaced all 18 latches on my Regency and only had one [starboard side, most forward latch for the generator compartment] that had a different latching mechanism on it.
It has a long, odd-shaped pawl similar to the one you have posted.
The *distance* to "latch" was too long for a stock pawl, so I think they made their own.
~Mac~
1990 31 Foot Regency
Spartan Chassis
Cummins 6CTA8.3
Alison MT643, 4-speed
8905-0123-31RDS-A2
07-29-2012, 10:38 AM
Fred & CindyMac
Did you keep your old latches you replaced? I am guessing they are like mine since we both have a 1990 Regency. I would like very much to purchase some of your old ones if they look like the one in the photo above. Thanks!
Jax
1990 Regency, 32'
1990 32' Regency, Wide Body
Spartan Chassis, 8.3 CTA Cummins
4 Speed Allison Trans
South Central Missouri
07-29-2012, 04:04 PM
RustyThere's actually a 4th
style.
Rusty
"StaRV II"'94 28' Breakaway: MilSpec AMG 6.5L TD 230HP
Nelson and Chester, not-spoiled Golden Retrievers
Sometimes I think we're alone in the universe, and sometimes I think we're not.
In either case the idea is quite staggering. - Arthur C. Clarke
It was a woman who drove me to drink, and I've been searching thirty years to find her and thank her - W. C. Fields
07-30-2012, 03:47 AM
Medic37Sorry for the delay in responding. Work has been busy tonight!
The reason I changed-out my latches was because several of them were so worn-out, the cams on the key could no longer grip the worn-down cams within the lock/latch.
I actually tossed several of them; which had to be in 2006/2007.
Unfortunately, there were only a few that were good enough to salvage and I sold or donated them to another member.
The new latches have a shank which is larger than the originals, so the PAWLS will still be a problem in adapting to a new latch.
~Mac~
1990 31 Foot Regency
Spartan Chassis
Cummins 6CTA8.3
Alison MT643, 4-speed
8905-0123-31RDS-A2
07-31-2012, 02:05 PM
Fred & CindyMac
I don't believe I will find an original to replace the broken pawl or latch. I notice you have a 1991 Regency. The doors are probably simular to my 1990. The doors are about an inch thick from which the pawl extends from there about two inches and then the latch is a straight piece of aluminum held on by a nut on each side. Can you please tell me where you got your replacements and what the part number was? I am having trouble finding the right one. Thanks!
Jax
1990 Regency, Diesel
1990 32' Regency, Wide Body
Spartan Chassis, 8.3 CTA Cummins
4 Speed Allison Trans
South Central Missouri
07-31-2012, 02:38 PM
Gary CarterI just ordered 10 of this from
E3-35-35
Amy L. Smith
ECP Hardware LLC
1825 Brinston Rd.
Troy, MI 48083
1-248-740-2727 (tel)
1-248-740-9444 (fax)
asmith@ecph.com
This subject has been covered a few times before. For more information click on the search and input southco
'92 Barth Breakaway - 30'
5.9 Cummins (6B) 300+ HP
2000 Allison
Front entrance
07-31-2012, 04:06 PM
Fred & CindyAmy
Thanks very much! I just ordered one from ECP Hardware.
Jax
1990 Regency, Diesel
1990 32' Regency, Wide Body
Spartan Chassis, 8.3 CTA Cummins
4 Speed Allison Trans
South Central Missouri
07-31-2012, 06:46 PM
Mac GrayThe best deal I was able to find was at Lowe's. The original on my coach were made by Southco who have priced themselves out of consideration.
Here is a link to the ones available at Lowe's which worked out fine for me.
http://www.lowes.com/pd_252752...rrentURL=&facetInfo=08-03-2012, 03:52 PM
RustyHere are better pix of the 4th style latch,which uses the E3-5-15 key (Note that the lever is from the original latch):
Rusty
"StaRV II"'94 28' Breakaway: MilSpec AMG 6.5L TD 230HP
Nelson and Chester, not-spoiled Golden Retrievers
Sometimes I think we're alone in the universe, and sometimes I think we're not.
In either case the idea is quite staggering. - Arthur C. Clarke
It was a woman who drove me to drink, and I've been searching thirty years to find her and thank her - W. C. Fields
08-04-2012, 05:54 PM
RustyI replaced the broken latch today. The new large washer was too thick, so if you have one of these latches to replace, save the large, original star washer.
Rusty
"StaRV II"'94 28' Breakaway: MilSpec AMG 6.5L TD 230HP
Nelson and Chester, not-spoiled Golden Retrievers
Sometimes I think we're alone in the universe, and sometimes I think we're not.
In either case the idea is quite staggering. - Arthur C. Clarke
It was a woman who drove me to drink, and I've been searching thirty years to find her and thank her - W. C. Fields