Barthmobile Portal
heater control 20FT Chev P30 350 V8

This topic can be found at:
https://www.barthmobile.com/eve/forums/a/tpc/f/3631087061/m/627109433

09-04-2010, 01:31 PM
Rich Fox
heater control 20FT Chev P30 350 V8
My dash cotrol is the standard Chevy but GM says they do not have parts.
I need the switch, mine will only run the heater motor on the third position next to high.
Also the cable end is broken and the cable retainer on one cable,so it will not operate the heat to no heat position.
I know they used this in motorhomes and trucks for years so there must be parts somewhere.
PS MY CELL IS 805 689 3000 Rich
09-04-2010, 01:51 PM
Tom and Julie
See this web site: http://www.classicchevroletpar...ode=cam10flx&from=2#


1993 32' Regency Wide Body, 4 speed Allison Trans, Front Entry door, Diamond Plate aluminum roof &
1981 Euro 22' w Chevy 350 engine and TH 400 tranny
09-04-2010, 02:08 PM
madrone
This may sound counterintuitive, but check your local Dodge dealer parts. Pull the switch and take it with you I am pretty sure the same one was used in Dodge trucks well into the 90's and was still available as of a few years ago. The fan
control rheostat is available as a seperate part.
09-04-2010, 02:47 PM
bill h
quote:
Originally posted by madrone:
This may sound counterintuitive, but check your local Dodge dealer parts. Pull the switch and take it with you I am pretty sure the same one was used in Dodge trucks well into the 90's and was still available as of a few years ago. The fan
control rheostat is available as a seperate part.


Yup. .....There is a wealth of information here on this site.......pictures, everything.


.

84 30T PeeThirty-Something, 502 powered