I just fixed thr right rear cylinder total kick down and leveler
Now I have to do the on the left side.in Naples it is b and b Hyd.
Reasonable and good the rear I think go first because of the weight of the engines easy fix this time out on the cylinder. DO NOT EXTEND THE CYLINDER OUT TO FAR USE SPACERS IT WILL SAVE THE HYD?
LENNY

lenny, how is the oil leak doing?

Tacking off the jack Tuesday.havent taken off the pan yet have housework to do first.
Can't leave 3 acres in southern Florida.for 2 1/2 months with it getting overgrowen
Lenny

The rear jack is off it goes in thursday.I will get new bolts .I had to use a five foot breaker to loosen them(to much stress) after that we get the brake job then the pan maybe leak is on front and right side will check valve cover first.
Lenny

cost for rear jack is cheap the charge was 2hours plus parts few dollars.
lenny

Lenny
Both my back levelers are not working and they would not even come down. I paid someone to work on them and they got them to finally come down, but they would not extend. They also leak a bunch. The guy said the hwh leveler is welded shut and he could not get to the seals. I would like to call the people that fixed your levelers. This is driving me crazy.... Can you give me the number?

Jax
1990 32' Regency, Cummins

Try www.hwhcorp.com
I80 exit 267 in Moscow Iowa
800 321 3494
They got customer support. You might just need new actuators you can install yourself.

Marvin + Doris
I tried hwh before and it took them three weeks to return my call at which time I had someone else working on my levelers (unsuccessfully). At your suggestion... I called again. This time I got through directly to the Service Dept. I have made arangements to drive my Barth to Moscow, IA. They will take my levelers off, rebuild them and reinstall them within the same day. They even have their own on-site RV park. From where I live in Missouri, it is about a 5 hour drive. Thanks for the help!

Jax
1990 32' Regency, Cummins