While having new tires installed recently on my friends 91 breakaway 28 ft. 5.9 allison 4 sp . the worker damaged one of the stud nuts & we can t seem to find a replacememt here in Canada, could someone out there enlighten us about this? I believe the wheel nuts & studs are left hand thread is this correct ? Thanks all Paul Finley /Baby Barth . Fenelon Falls Ont. / Cedar Key Fl. & now stuck in Parrsboro Nova Scotia

Hello Baby Barth, try "Euclid E-9011-L" single-ended stud. I bought them from Heavy Duty Parts. Don't ask me how I know. We own a 1993 Breakaway.

Good Luck,

John

Thanks John but we are looking a source for the left hand threaded wheel nut. I think these are all dana axles so should still be available even though were likely only on 1990 s equipment. Perhaps someone knows of a person parting out awrecked barth .

The left side are left hand thread. I buy them at our local truck parts here in Yuma. There is nothing specail about them. They are the same as the 22" wheels.

[QUOTE]Originally posted by Gary Carter:
The left side are left hand thread. I buy them at our local truck parts here in Yuma. There is nothing specal about them. They are the same as the 22" wheels.

Also check out truck tire stores. They inventory this stuff.

Sorry Baby Barth, I didn't do a very good job answering your question. The wheel lug nut is 3/4" 16 UNF 2A left hand threads. Gary Carter is right. There shouldn't be anything special about them other than they are left-handed. I believe twenty four manufacturers including Budd, Euclid, & Dana Spicer, etc carry a 3/4" 16 wheel nut. Euclid's part # is 5625(I believe but am not positive). I'll try to improve my reading comprehension next time.

Good Luck,

John

Thanks John & Gary that is all helpful