Forums    General Discussions    Plastic Bumper End Caps. Possible Production Run.
Page 1 2 3 4 5 6 
Go to...
Start A New Topic
Search
Notify
Tools
Reply To This Topic
  
Plastic Bumper End Caps. Possible Production Run.
 Login now/Join our community
 
"Host" of Barthmobile.com
Supporting Member of Barthmobile.com 1/19
Picture of Bill N.Y.
posted
I am looking for anyone who wants to order these end caps for their bumpers.

I am only going to order enough for one run. I can't afford to over order and have these sitting on the shelf.

Price is dependent on quantity so the more I order, the better the price.

Also looking for a better picture to post if someone has one. So, if you have a better image, please post it.

So, who wants these and how many should I order?

I need to give a quantity by Monday, August 23rd


Bill: I have the prototype shop working on producing these parts. They would be universal and you have to carve the slots in the plastic to mate to the face of the bumper. The cost will depend on the number to be made. They will be vacuum formed ABS, black and have the same pebble grain as original. Could you pick out a picture of a coach showing the bumper and then if I can get some idea of the quantity I can get a price and then we can decide how to market them. A general post might be enough.



˙ʎ˙u ןןıq- „ǝןƃuɐ ʇuǝɹǝɟɟıp ɐ ɯoɹɟ pןɹoʍ ǝɥʇ ʇɐ ʞooן ɐ ƃuıʞɐʇ sı ǝɟıן oʇ ʇǝɹɔǝs ǝɥʇ„

Regis Widebody1990 Barth Regis Widebody
8908 0128 40RDS-C1
L-10 Cummins
Allison MT647 Transmission
Spartan Chassis
Regal Conversion1991 Medical Lab Conversion
9102 3709 33S-12
Ford 460 MPFI
C6 Transmission
Oshkosh Chassis



Quick Link: Members Only Link To Send Me A Private Message
 
Posts: 5924 | Location: Newburgh, New York | Member Since: 05-10-2003Reply With QuoteReport This Post
Supporting Member of Barthmobile.com 03/22
posted Hide Post
I'll take 8 pieces Bill, THANKS for supporting this!


Ed
94 30' Breakaway #3864
30-BS-6B side entry
New Cummins 5.9L, 375+ HP
Allison 6 speed
Spartan chassis
K9DVC
Tankless water heater
 
Posts: 2176 | Location: Los Gatos, CA | Member Since: 12-08-2005Reply With QuoteReport This Post
Picture of John Papasergia
posted Hide Post
Are the front and rear the same? I lost a right rear last month so I'd like at least one probably a couple if the fit and price is right.
 
Posts: 18 | Location: Bakersfield | Member Since: 03-11-2010Reply With QuoteReport This Post
"Host" of Barthmobile.com
Supporting Member of Barthmobile.com 1/19
Picture of Bill N.Y.
posted Hide Post
I am going to order 6 up for myself. I never had them on my coach... Heck, I don't even know how they stick on. Anyone know how they are affixed to the coach?

I will only charge you what I pay for shipping, if you have your own UPS or Fed Ex customer number I'll use that. Otherwise they'll go out to you the way you request it.

UPS - US Postal Service - FedEx - Etc...


˙ʎ˙u ןןıq- „ǝןƃuɐ ʇuǝɹǝɟɟıp ɐ ɯoɹɟ pןɹoʍ ǝɥʇ ʇɐ ʞooן ɐ ƃuıʞɐʇ sı ǝɟıן oʇ ʇǝɹɔǝs ǝɥʇ„

Regis Widebody1990 Barth Regis Widebody
8908 0128 40RDS-C1
L-10 Cummins
Allison MT647 Transmission
Spartan Chassis
Regal Conversion1991 Medical Lab Conversion
9102 3709 33S-12
Ford 460 MPFI
C6 Transmission
Oshkosh Chassis



Quick Link: Members Only Link To Send Me A Private Message
 
Posts: 5924 | Location: Newburgh, New York | Member Since: 05-10-2003Reply With QuoteReport This Post
Supporting Member of Barthmobile.com 03/22
posted Hide Post
Mine had 2 small screws into the bumper top and bottom, tomorrow I will take pictures and post. I have 2 that I took off when I lost the other two in a huge AZ windstorm.

If I can help let me know.

Mine were the same front and rear.


Ed
94 30' Breakaway #3864
30-BS-6B side entry
New Cummins 5.9L, 375+ HP
Allison 6 speed
Spartan chassis
K9DVC
Tankless water heater
 
Posts: 2176 | Location: Los Gatos, CA | Member Since: 12-08-2005Reply With QuoteReport This Post
Supporting Member of Barthmobile.com 8/11
Picture of Bruce & Kathleen
posted Hide Post
I would be interested in (2) if they are not going to cost a fortune. I thought that the ones on my Breakaway were like a "sleeve" and pushed on over the end of the bumper. I need to check that out. I have one that needs replacing and would keep one as a spare.
I have found that sometimes when someone is doing this type of work and producing parts you cannot find, your pricing is also based on the costs of molds to make the parts. Unfortunately I have found that on limited automotive reproductions, this fee can be quite hefty. That is why the more you order the easier it is for the person to spread that fee over the quantity, therefore lowering the price.


9303 3855 33BS 1B
Bruce & Kathleen
1993 33' Front Entrance Breakaway
230HP Cummins 5.9, Allison 6 speed, Spartan Chassis, Nicely Optioned
 
Posts: 616 | Location: New Jersey | Member Since: 04-01-2007Reply With QuoteReport This Post
Supporting Member of Barthmobile.com 3/11
Picture of Tom  and Julie
posted Hide Post
Here are the ends. They glue to the bumper face, you trim for the profiles and any slots for the front bumper when it is moved outward to reach the generator or engine.



We will have a price estimate shortly.


1993 32' Regency Wide Body, 4 speed Allison Trans, Front Entry door, Diamond Plate aluminum roof &
1981 Euro 22' w Chevy 350 engine and TH 400 tranny
 
Posts: 1513 | Location: Houston Texas | Member Since: 12-19-2006Reply With QuoteReport This Post
Supporting Member of Barthmobile.com 03/22
posted Hide Post
And more:



holes that held the plastic piece front top



Holes that held the plastic piece front bottom



holes that held the plastic piece rear




Ed
94 30' Breakaway #3864
30-BS-6B side entry
New Cummins 5.9L, 375+ HP
Allison 6 speed
Spartan chassis
K9DVC
Tankless water heater
 
Posts: 2176 | Location: Los Gatos, CA | Member Since: 12-08-2005Reply With QuoteReport This Post
Supporting Member of Barthmobile.com 8/10
posted Hide Post
I'd be interested in 5 at a reasonable price....2 each for front/back bumpers and one spare.

Think they'd be less than $20 each?

K&E
 
Posts: 429 | Location: The Great Midwest | Member Since: 12-04-2009Reply With QuoteReport This Post
"Host" of Barthmobile.com
Supporting Member of Barthmobile.com 1/19
Picture of Bill N.Y.
posted Hide Post
quote:
Originally posted by K&E:
Think they'd be less than $20 each?
I'll let you know what they say. I have no idea what to expect and if I try to fathom a guess I'll be wrong anyway. Wink


˙ʎ˙u ןןıq- „ǝןƃuɐ ʇuǝɹǝɟɟıp ɐ ɯoɹɟ pןɹoʍ ǝɥʇ ʇɐ ʞooן ɐ ƃuıʞɐʇ sı ǝɟıן oʇ ʇǝɹɔǝs ǝɥʇ„

Regis Widebody1990 Barth Regis Widebody
8908 0128 40RDS-C1
L-10 Cummins
Allison MT647 Transmission
Spartan Chassis
Regal Conversion1991 Medical Lab Conversion
9102 3709 33S-12
Ford 460 MPFI
C6 Transmission
Oshkosh Chassis



Quick Link: Members Only Link To Send Me A Private Message
 
Posts: 5924 | Location: Newburgh, New York | Member Since: 05-10-2003Reply With QuoteReport This Post
First Month Member
Supporting Member of Barthmobile.com 11/13
posted Hide Post
It is always hard to guess how much profit someone thinks they can get.


.

84 30T PeeThirty-Something, 502 powered
 
Posts: 6169 | Location: AZ Central Highlands | Member Since: 01-09-2001Reply With QuoteReport This Post
Supporting Member of Barthmobile.com 1/12
Picture of Don in Niagara
posted Hide Post
We will take 2 as spares.
Don


1990 Regency 34'
Cummins 6CTA 8.3 240hp
Spartan Chassis,
4 speed Allison MT643
 
Posts: 630 | Location: Niagara Falls, Canada | Member Since: 11-09-2004Reply With QuoteReport This Post
Supporting Member of Barthmobile.com 6/17
Picture of Richard_Muise
posted Hide Post
Put me down for 2


R.P.Muise 1994 Breakaway/Cummins 5.9/Allison transmission/Spartan Chassis
 
Posts: 662 | Location: Hampden, Massachusetts | Member Since: 10-13-2005Reply With QuoteReport This Post
Supporting Member of Barthmobile.com 8/10
Picture of Medic37
posted Hide Post
I have 2 that are shredded and would like to replace those 2 for sure. I would say 4, but I might be putting a different style of bumper on the front, so I don't know if I would need them.

I know you are not able to provide pricing information as of yet, but it DOES kinda depend-on how much they would cost...


~Mac~

1990 31 Foot Regency
Spartan Chassis
Cummins 6CTA8.3
Alison MT643, 4-speed
8905-0123-31RDS-A2
 
Posts: 259 | Location: Sand Creek Township, Minnesota | Member Since: 06-21-2005Reply With QuoteReport This Post
"Host" of Barthmobile.com
Supporting Member of Barthmobile.com 1/19
Picture of Bill N.Y.
posted Hide Post
quote:
Originally posted by Medic37:
...but it DOES kinda depend-on how much they would cost...
I am painfully aware of that. Right now, I am only gauging interest.


˙ʎ˙u ןןıq- „ǝןƃuɐ ʇuǝɹǝɟɟıp ɐ ɯoɹɟ pןɹoʍ ǝɥʇ ʇɐ ʞooן ɐ ƃuıʞɐʇ sı ǝɟıן oʇ ʇǝɹɔǝs ǝɥʇ„

Regis Widebody1990 Barth Regis Widebody
8908 0128 40RDS-C1
L-10 Cummins
Allison MT647 Transmission
Spartan Chassis
Regal Conversion1991 Medical Lab Conversion
9102 3709 33S-12
Ford 460 MPFI
C6 Transmission
Oshkosh Chassis



Quick Link: Members Only Link To Send Me A Private Message
 
Posts: 5924 | Location: Newburgh, New York | Member Since: 05-10-2003Reply With QuoteReport This Post
  Powered by Social Strata Page 1 2 3 4 5 6  
 

    Forums    General Discussions    Plastic Bumper End Caps. Possible Production Run.

This website is dedicated to the Barth Custom Coach, their owners and those who admire this American made, quality crafted, motor coach.
We are committed to the history, preservation and restoration of the Barth Custom Coach.