Forums    General Discussions    Plastic Bumper End Caps. Possible Production Run.
Page 1 2 3 4 5 6 
Go to...
Start A New Topic
Search
Notify
Tools
Reply To This Topic
  
Plastic Bumper End Caps. Possible Production Run.
 Login now/Join our community
 
Supporting Member of Barthmobile.com 2/14
Picture of Jerry Jelsing
posted Hide Post
I would still go for 2. I have one that is above the exhaust that has become pretty distorted, and a spare would be nice.
Jerry
 
Posts: 84 | Location: Olympia Wa. | Member Since: 10-31-2009Reply With QuoteReport This Post
Glassnose Aficionado
Supporting Member of Barthmobile.com 2/09
Picture of Danny Z
posted Hide Post
Olroy, although I may not agree with you 100% I sure do this time around.


79 Barth Classic
 
Posts: 3582 | Location: Venice Fl. | Member Since: 07-12-2004Reply With QuoteReport This Post
Supporting Member of Barthmobile.com 4/08
posted Hide Post
Put me down for two. Don't need them now, but the future. Probably should get four because of the AZ sun. Guess it is time to preserve the ones I have.

Has anyone tried to paint them. They have paint for plastic parts these days.


'92 Barth Breakaway - 30'
5.9 Cummins (6B) 300+ HP
2000 Allison
Front entrance
 
Posts: 971 | Location: Minneapolis/Yuma | Member Since: 08-17-2006Reply With QuoteReport This Post
Supporting Member of Barthmobile.com 1/12
Picture of Don in Niagara
posted Hide Post
We will also take 2 as spares.
Don
quote:
Originally posted by Gary Carter:
Put me down for two. Don't need them now, but the future. Probably should get four because of the AZ sun. Guess it is time to preserve the ones I have.

Has anyone tried to paint them. They have paint for plastic parts these days.


1990 Regency 34'
Cummins 6CTA 8.3 240hp
Spartan Chassis,
4 speed Allison MT643
 
Posts: 754 | Location: Niagara Falls, Canada | Member Since: 11-09-2004Reply With QuoteReport This Post
"Host" of Barthmobile.com
Supporting Member of Barthmobile.com 8/16
Picture of Bill N.Y.
posted Hide Post
~ 36 to go.
quote:
I got back with the molder and we have a better price. By using a lower quality mold (as in mechanically stout) that will work for several hundred rather than several thousand parts he can reduce the cost on the mold to $300. The quality on 50 or so units would not be reduced. If we do the cutting of the profiles to suit our coach bumper profiles and trim the edges ourselves we can have them for $29 each. That makes the cost of 40 $36.50 each. There would be a small shipping charge to our business that I will cover, then each member can get them via flat rate post for $12.50 per order.
What does this really mean?

The $500 mold is now $300. To recoup the cost of the mold would cost each member who orders and additional $7.50 per unit. The cost is now $36.50 each for a min order of 40 pieces.

Shipping charges are an additional USP Flat Rate of $12.50 per box shipped. We should be able to get 4 in a box.

The member who is doing this has graciously offered to absorb the shipping charges of these 40 pieces to his place of business and ship them out to you.


Because these pieces are not a high priority item for our coaches, I see no reason to order an abundance of them and stock em for future sales.

In the future, someone who wants these will have to talk more members into buying them before they can get some for themselves. So, if you plan on ordering them, let us know so we can get an order together.

I am not getting any for free because of my position here - I have also refused payment for doing a "Quick Website HTML Job" in hopes of getting a better price for all of you who chooses to order.

If you want these, speak up now by requesting them below this post - if we can get an order together that is close to 40 we'll pull the trigger.

If I'm doing this right it will cost me

$36.50 each x 4 pc = $146.00 + $12.50 shipping = $158.50 total.

36 to go.
I will keep a running total - You will see this above each post when someone decides to order these.

Do not send me any money - you'll get an email for payment instructions from the member who is doing this... That is, if we get enough together. Likewise, If we can get more than 40 ordered up - the price will be cheaper per piece and we'll let you know what the newer reduced rate is at that time.

With my order, we are now 10% of the way there to getting this done. See, it's not too hard to get there.

Just a quick thought... If you need them, I would order them now. I really don't see the above scenario of "talking more members into buying them" really panning out... Do you? Roll Eyes


˙ʎ˙u ןןıq- „ǝןƃuɐ ʇuǝɹǝɟɟıp ɐ ɯoɹɟ pןɹoʍ ǝɥʇ ʇɐ ʞooן ɐ ƃuıʞɐʇ sı ǝɟıן oʇ ʇǝɹɔǝs ǝɥʇ„

Regis Widebody1990 Barth Regis Widebody
8908 0128 40RDS-C1
L-10 Cummins
Allison MT647 Transmission
Spartan Chassis
Regal Conversion1991 Medical Lab Conversion
9102 3709 33S-12
Ford 460 MPFI
C6 Transmission
Oshkosh Chassis



Quick Link: Members Only Link To Send Me A Private Message
 
Posts: 7297 | Location: Newburgh, New York | Member Since: 05-10-2003Reply With QuoteReport This Post
Supporting Member of Barthmobile.com 10/08
Picture of MWrench
posted Hide Post
~ 30 to go.
~ 25% of these have now been ordered.

Hi Bill, first of all, thanks to you and the Barthmobile member that is working so hard for us all!

I am in for 6 pieces.

Thanks!


Ed
94 30' Breakaway #3864
30-BS-6B side entry
230 Cummins, Allison 6 speed
Spartan chassis
K9DVC
 
Posts: 2039 | Location: Los Gatos, CA | Member Since: 12-08-2005Reply With QuoteReport This Post
"Host" of Barthmobile.com
Supporting Member of Barthmobile.com 8/16
Picture of Bill N.Y.
posted Hide Post
~ 24 to go.
~ 40% of these have now been ordered.
quote:
Originally posted by Jerry Jelsing:
I would still go for 2. I have one that is above the exhaust that has become pretty distorted, and a spare would be nice.
quote:
Originally posted by Don in Niagara:
We will also take 2 as spares.
Don
quote:
Originally posted by Gary Carter:
Put me down for two.
Jerry, Don & Gary... Seeing that you posted this when the price was a little higher, I will ass-u-me you guys are still in for two each. Computer


˙ʎ˙u ןןıq- „ǝןƃuɐ ʇuǝɹǝɟɟıp ɐ ɯoɹɟ pןɹoʍ ǝɥʇ ʇɐ ʞooן ɐ ƃuıʞɐʇ sı ǝɟıן oʇ ʇǝɹɔǝs ǝɥʇ„

Regis Widebody1990 Barth Regis Widebody
8908 0128 40RDS-C1
L-10 Cummins
Allison MT647 Transmission
Spartan Chassis
Regal Conversion1991 Medical Lab Conversion
9102 3709 33S-12
Ford 460 MPFI
C6 Transmission
Oshkosh Chassis



Quick Link: Members Only Link To Send Me A Private Message
 
Posts: 7297 | Location: Newburgh, New York | Member Since: 05-10-2003Reply With QuoteReport This Post
"Host" of Barthmobile.com
Supporting Member of Barthmobile.com 8/16
Picture of Bill N.Y.
posted Hide Post
~ 20 to go.
~ 50% of these have now been ordered.

Just received an email from another person...
quote:
Steven - Fontana, CA

I would buy 4 plastic bumper ends
I have forwarded your info, address and phone numbers to the member who is doing this for us Steven.


˙ʎ˙u ןןıq- „ǝןƃuɐ ʇuǝɹǝɟɟıp ɐ ɯoɹɟ pןɹoʍ ǝɥʇ ʇɐ ʞooן ɐ ƃuıʞɐʇ sı ǝɟıן oʇ ʇǝɹɔǝs ǝɥʇ„

Regis Widebody1990 Barth Regis Widebody
8908 0128 40RDS-C1
L-10 Cummins
Allison MT647 Transmission
Spartan Chassis
Regal Conversion1991 Medical Lab Conversion
9102 3709 33S-12
Ford 460 MPFI
C6 Transmission
Oshkosh Chassis



Quick Link: Members Only Link To Send Me A Private Message
 
Posts: 7297 | Location: Newburgh, New York | Member Since: 05-10-2003Reply With QuoteReport This Post
Supporting Member of Barthmobile.com 2/14
Picture of Jerry Jelsing
posted Hide Post
~ Thanks...

Yes, Bill, I am still in for 2. Thanks for all your work on this.
 
Posts: 84 | Location: Olympia Wa. | Member Since: 10-31-2009Reply With QuoteReport This Post
Supporting Member of Barthmobile.com 5/11
Picture of train701
posted Hide Post
~ 16 to go.
~ 60% of these have now been ordered.

Bill,NY: Great job. Put me down for 4 caps.


9102 3718 30BS 4B
91 30ft Breakaway, front entry
6BT5.9 Cummins, Allison AT542
Spartan EC2000
 
Posts: 13 | Location: Eastern NC | Member Since: 01-01-2010Reply With QuoteReport This Post
Supporting Member of Barthmobile.com 4/08
posted Hide Post
~ Thanks...

Still take two


'92 Barth Breakaway - 30'
5.9 Cummins (6B) 300+ HP
2000 Allison
Front entrance
 
Posts: 971 | Location: Minneapolis/Yuma | Member Since: 08-17-2006Reply With QuoteReport This Post
Supporting Member of Barthmobile.com 3/11
Picture of Tom  and Julie
posted Hide Post
~ 14 to go.
~ 65% of these have now been ordered.

I want two as well!


1993 32' Regency Wide Body, 4 speed Allison Trans, Front Entry door, Diamond Plate aluminum roof &
1981 Euro 22' w Chevy 350 engine and TH 400 tranny
 
Posts: 1443 | Location: Houston Texas | Member Since: 12-19-2006Reply With QuoteReport This Post
"Host" of Barthmobile.com
Supporting Member of Barthmobile.com 8/16
Picture of Bill N.Y.
posted Hide Post
Anyone else looking to get these? We need a few more people to order these up... 40 is the min count required.

14 more to go if you're interested.


˙ʎ˙u ןןıq- „ǝןƃuɐ ʇuǝɹǝɟɟıp ɐ ɯoɹɟ pןɹoʍ ǝɥʇ ʇɐ ʞooן ɐ ƃuıʞɐʇ sı ǝɟıן oʇ ʇǝɹɔǝs ǝɥʇ„

Regis Widebody1990 Barth Regis Widebody
8908 0128 40RDS-C1
L-10 Cummins
Allison MT647 Transmission
Spartan Chassis
Regal Conversion1991 Medical Lab Conversion
9102 3709 33S-12
Ford 460 MPFI
C6 Transmission
Oshkosh Chassis



Quick Link: Members Only Link To Send Me A Private Message
 
Posts: 7297 | Location: Newburgh, New York | Member Since: 05-10-2003Reply With QuoteReport This Post
Supporting Member of Barthmobile.com 2/10
Picture of bud@YXY
posted Hide Post
~ 12 to go.
~ 70% of these have now been ordered.

Bill:
I will raise my request from 2 to four

Thanks Bud


1993 Breakaway 36ft & 1977 20 ft
Spartan: air ride and brakes & P32(?)
Cummins: 8.3 litre 250hp, PACBrake
Allison 3060 (6 spd)
Front entry, side hallway
7.5 kw diesel gen.
1999 2dr Tracker 4X4 5spd, SMI Braking system
 
Posts: 246 | Location: Yukon--Arizona and around | Member Since: 06-09-2006Reply With QuoteReport This Post
"Host" of Barthmobile.com
Supporting Member of Barthmobile.com 8/16
Picture of Bill N.Y.
posted Hide Post
~ 8 to go.
~ 80% of these have now been ordered.

Just got another PM from a fellow member.
quote:
Is it too late to order 4 caps for "The Coke Machine"?
I'm pretty sure he is talking about this coach.





˙ʎ˙u ןןıq- „ǝןƃuɐ ʇuǝɹǝɟɟıp ɐ ɯoɹɟ pןɹoʍ ǝɥʇ ʇɐ ʞooן ɐ ƃuıʞɐʇ sı ǝɟıן oʇ ʇǝɹɔǝs ǝɥʇ„

Regis Widebody1990 Barth Regis Widebody
8908 0128 40RDS-C1
L-10 Cummins
Allison MT647 Transmission
Spartan Chassis
Regal Conversion1991 Medical Lab Conversion
9102 3709 33S-12
Ford 460 MPFI
C6 Transmission
Oshkosh Chassis



Quick Link: Members Only Link To Send Me A Private Message
 
Posts: 7297 | Location: Newburgh, New York | Member Since: 05-10-2003Reply With QuoteReport This Post
  Powered by Social Strata Page 1 2 3 4 5 6  
 

    Forums    General Discussions    Plastic Bumper End Caps. Possible Production Run.

This website is dedicated to the Barth Custom Coach, their owners and those who admire this American made, quality crafted, motor coach.
We are committed to the history, preservation and restoration of the Barth Custom Coach.