Barthmobile Portal
Looking for ladder parts

This topic can be found at:
https://www.barthmobile.com/eve/forums/a/tpc/f/4781063702/m/2643953887

08-28-2016, 10:38 AM
Fred & Cindy
Looking for ladder parts
Well... after searching for new ladders I have decided to try repairing it myself. My ladder is old, of course, and I would like to keep it looking as original as possible. I am looking for 2 pieces of 18 inch ladder tubing and a couple of mounts. The mounts are about 5 inches long with each having a plate on bottom that rivets on to the coach. The mounts also have a plastic cap on the other end that raps half way around the ladder tubing for anchoring with a screw. Don't need any steps. If anyone has these older parts laying around I would be happy to buy them from you and pay for shipping. Thanks!


1990 32' Regency, Wide Body
Spartan Chassis, 8.3 CTA Cummins
4 Speed Allison Trans
South Central Missouri
08-28-2016, 04:21 PM
Kevin
quote:
Originally posted by Fred & Cindy:
I am taking it in Tuesday to a small business owner for replacement of the latter. I have used him before and believe he will do a good job at a fair price.


I thought you were getting a new ladder built. Keep in mind you could also use electrical conduit for the frame. Conduit would be a little stronger also. You can buy the plastic plugs at most hardware stores.
08-28-2016, 04:51 PM
Fred & Cindy
Actually did have a new one put on but I don't like it. Its flimsy, more narrow, and just plain does not look right. I learned a hard lesson here. Would prefer original ladder parts if someone has any laying around.


1990 32' Regency, Wide Body
Spartan Chassis, 8.3 CTA Cummins
4 Speed Allison Trans
South Central Missouri
08-28-2016, 10:53 PM
MWrench
I have a ladder that I removed some time ago. Unfortunately I am in Denver and will not be back until Sept 8.

When I get back I will check to see if the parts I have would work for you and advise.


Ed
94 30' Breakaway #3864
30-BS-6B side entry
New Cummins 5.9L, 375+ HP
Allison 6 speed
Spartan chassis
K9DVC
Tankless water heater
08-29-2016, 06:08 AM
rp's barth
Can you send me a picture of what you need? I work at a dealership and we change ladders all the time and i have a few parts,


Richard & Robin
s7809 2539 MC27 FP3

  • 1979 27'
  • 454 Chevy
  • P-32 Chassis
08-29-2016, 04:40 PM
Fred & Cindy
rp's barth... thanks, I will try sending you a personal message with photos.


1990 32' Regency, Wide Body
Spartan Chassis, 8.3 CTA Cummins
4 Speed Allison Trans
South Central Missouri
09-19-2016, 11:00 PM
Evan & Holly
I just got a regency 1992 I need a ladder if anyone has one let me know 732-673-2284