Start A New Topic
Reply To This Topic
Finally got a cool day to tackle the stripped gear in the Winegard batwing. I removed the entire assembly from the roof, only to find I didn't have to. Remove the crank handle by loosening the allen set screw. [Inside the coach]. Don't bother taking the trim plate off, it's only there to show you where to position the antenna for lowering. Up top, remove the large plastic nut using a good fitting 6 point socket if possible. It's very tight and fights you all the way out. This is the lockdown for the pinion gear. once removed, the pinion is removed by cranking with a 1/4 socket. The new pinion has to be cut to length so save the stripped one for a guide. Crank the new one back in, replace the plastic cap, and you're good to go. If any of you lube techs has a recomendation on the plastic rack and pinion gears, let us know. The gear is 12 bucks and change. Beats a bill and a half for a new Batwing!
Dan & Suzy Z
'81 Euro 28 - Slide Show
Super Lube Grease
'94 28' Breakaway: MilSpec AMG 6.5L TD 230HP
Nelson and Chester, not-spoiled Golden Retrievers
Sometimes I think we're alone in the universe, and sometimes I think we're not.
In either case the idea is quite staggering. - Arthur C. Clarke
It was a woman who drove me to drink, and I've been searching thirty years to find her and thank her - W. C. Fields
|Powered by Social Strata|