Screen Removal Bargman L-300 Door Handle brakes Satellite Fuel Tank Fire Extinguishers Roof Antenna Tech Talk Forum Shortcut Motor Oil Window Generators headlights batteries Radiator AC Unit Grab Handle Wiper Blades Wiper Blades Door Locks Door Locks Door Locks Door Locks Rims Front Shocks Rear Shocks Front Tires Oil Filter Steps Roof Vent Awning Propane Tank Mirror Info Clearance Lights Clearance Lights Clearance Lights Clearance Lights Clearance Lights Spartan Chassis Gillig Chassis Freightliner Chassis P-32 Chassis MCC Chassis
    Forums    Tech Talk    exhaust pipe replacement
Go to...
Start A New Topic
Search
Notify
Tools
Reply To This Topic
  
exhaust pipe replacement
 Login now/Join our community
 
Supporting Member of Barthmobile.com 6/17
Picture of Richard_Muise
posted
There is a pipe between the manifold and the muffler, very short and bent at a 90 degree angle. My mechanic noticed to holes in it but was unable to find a replacement. He welded the two holes shut and said it would last a couple of years. Anyone have any idea where I could get a replacement?


R.P.Muise 1994 Breakaway/Cummins 5.9/Allison transmission/Spartan Chassis
 
Posts: 662 | Location: Hampden, Massachusetts | Member Since: 10-13-2005Reply With QuoteReport This Post
Supporting Member of Barthmobile.com 1/21
posted Hide Post
quote:
Originally posted by Richard_Muise:
There is a pipe between the manifold and the muffler, very short and bent at a 90 degree angle. My mechanic noticed to holes in it but was unable to find a replacement. He welded the two holes shut and said it would last a couple of years. Anyone have any idea where I could get a replacement?

Many muffler shops have pipe bending equipment and can custom make almost any configuration.





#1 29' 1977parted out and still alive in Barths all over the USA




 
Posts: 1028 | Location: Floral City FL | Member Since: 04-25-2008Reply With QuoteReport This Post
Supporting Member of Barthmobile.com 3/23
Picture of Duane88
posted Hide Post
I agree with Dick Dubbs, my exhaust system was in bad shape, a local pipe shop ordered new mufflers and made all the pipes in house, not cheap, but it sure looks and sounds good. They did reuse those that were in good shape, saved a few bucks.


1971 24 ft Barth Continental
P30 chassis
350 engine
 
Posts: 2041 | Location: Clinton Iowa | Member Since: 04-02-2017Reply With QuoteReport This Post
Supporting Member of Barthmobile.com 03/22
posted Hide Post
I don't think you will find an exact replacement. I did replace mine with 4" all the way from the turbo to the bumper, I am blessed that I can do this. I also replaced the muffler with a 4"X18" glass pack. It is louder outside but noticed no difference inside driving.


Ed
94 30' Breakaway #3864
30-BS-6B side entry
New Cummins 5.9L, 375+ HP
Allison 6 speed
Spartan chassis
K9DVC
Tankless water heater
 
Posts: 2176 | Location: Los Gatos, CA | Member Since: 12-08-2005Reply With QuoteReport This Post
Supporting Member of Barthmobile.com 3/23
Picture of Duane88
posted Hide Post
quote:
Originally posted by MWrench:
I don't think you will find an exact replacement. I did replace mine with 4" all the way from the turbo to the bumper, I am blessed that I can do this. I also replaced the muffler with a 4"X18" glass pack. It is louder outside but noticed no difference inside driving.


Hot rod RV.cool...lol


1971 24 ft Barth Continental
P30 chassis
350 engine
 
Posts: 2041 | Location: Clinton Iowa | Member Since: 04-02-2017Reply With QuoteReport This Post
Supporting Member of Barthmobile.com 03/22
posted Hide Post
I also replaced the manifold with a two piece design, this will be number 4 manifold. Lots of shrinkage with the OEM manifolds so I thought I would try this one. Flows a lot better, did notice an increase in torque but at 20K lbs wouldn't call it a hot rod, HaHa





Ed
94 30' Breakaway #3864
30-BS-6B side entry
New Cummins 5.9L, 375+ HP
Allison 6 speed
Spartan chassis
K9DVC
Tankless water heater
 
Posts: 2176 | Location: Los Gatos, CA | Member Since: 12-08-2005Reply With QuoteReport This Post
Picture of Jim_Rockford007
posted Hide Post
mine had headers and dual pipes with some small turbo mufflers..lol the big block Should run good once i get to tweaking on it and some gas thats not 2 years old
 
Posts: 43 | Location: Auburndale,Fla | Member Since: 03-23-2018Reply With QuoteReport This Post
Supporting Member of Barthmobile.com 3/23
Picture of Duane88
posted Hide Post
Ed,, you diesel guys have all the fun.lol


1971 24 ft Barth Continental
P30 chassis
350 engine
 
Posts: 2041 | Location: Clinton Iowa | Member Since: 04-02-2017Reply With QuoteReport This Post
Picture of Jim_Rockford007
posted Hide Post
LOL they are a shitton of work to keep up .
 
Posts: 43 | Location: Auburndale,Fla | Member Since: 03-23-2018Reply With QuoteReport This Post
  Powered by Social Strata  
 

    Forums    Tech Talk    exhaust pipe replacement

This website is dedicated to the Barth Custom Coach, their owners and those who admire this American made, quality crafted, motor coach.
We are committed to the history, preservation and restoration of the Barth Custom Coach.