Screen Removal Bargman L-300 Door Handle brakes Satellite Fuel Tank Fire Extinguishers Roof Antenna Tech Talk Forum Shortcut Motor Oil Window Generators headlights batteries Radiator AC Unit Grab Handle Wiper Blades Wiper Blades Door Locks Door Locks Door Locks Door Locks Rims Front Shocks Rear Shocks Front Tires Oil Filter Steps Roof Vent Awning Propane Tank Mirror Info Clearance Lights Clearance Lights Clearance Lights Clearance Lights Clearance Lights Spartan Chassis Gillig Chassis Freightliner Chassis P-32 Chassis MCC Chassis
    Forums    Tech Talk    Breakaway Brake Hose
Go to...
Start A New Topic
Search
Notify
Tools
Reply To This Topic
  
Breakaway Brake Hose
 Login now/Join our community
 
Supporting Member of Barthmobile.com 1/21
Picture of Pirate19
posted
Trust y'all doing well.
Might anyone have a part number for a Breakaway front (left) brake hose - Napa, Spartan, or anyone else?
Thanks for your thoughts. Salute


'92 Breakaway
Cummins 190hp, No Modifications
Allison AT542
Floor Plan 30-BS-11B
9205-3798-30BS11B
 
Posts: 384 | Location: USA | Member Since: 11-07-2014Reply With QuoteReport This Post
posted Hide Post
sorry i do not have any info on part numbers but


the physic of brakes hoses is

they all are very very similar . ( all will hold the same pressure . )

if you measure the length and buy one that length or a little longer , and it has the same fitting as the original on the ends , it is good to go .

if it is longer , make sure it does not rub on anything ie zip ties .

take it to a big NAPA store , in the middle of the morning , when they are not busy , bring a dozen donuts and say ahah enough times and walk out with a hose , some zip ties and a quart of dot 3 and you are good to go .


i am sure some will horrors over this answer but the physics is correct
 
Posts: 65 | Location: Royal Oak, Michigan | Member Since: 06-14-2020Reply With QuoteReport This Post
Supporting Member of Barthmobile.com 1/21
Picture of Pirate19
posted Hide Post
Believe me, playing dumb comes very natural to me. Thanks for your advice.


'92 Breakaway
Cummins 190hp, No Modifications
Allison AT542
Floor Plan 30-BS-11B
9205-3798-30BS11B
 
Posts: 384 | Location: USA | Member Since: 11-07-2014Reply With QuoteReport This Post
Official Barth Junkie
Supporting Member of Barthmobile.com 1/24
Picture of Steve VW
posted Hide Post
Call Spartan with your VIN# and they may be able to give you their part number. OTOH, they used suspension components from other manufacturers and often renumbered them. You may at least be able to find a cross reference. If you can get the dimensions, as Jack suggests, a good hose guy can make one.


9708-M0037-37MM-01
"98" Monarch 37
Spartan MM, 6 spd Allison
Cummins 8.3 325+ hp
 
Posts: 5159 | Location: Kalkaska, MI | Member Since: 02-04-2011Reply With QuoteReport This Post
Supporting Member of Barthmobile.com 6/19
Picture of Harold,Cat&Sam
posted Hide Post
If it helps , I believe the brake calipers are medium duty Ford's , such as f650 or f750 .


Harold
Cat
Sam Miniature Schnauzer
3.8.2009 - 9.24.2021

93 30ft Breakaway
9209-3823-30BS-11B

KE5WCW
 
Posts: 621 | Location: Mooringsport,LA | Member Since: 05-30-2019Reply With QuoteReport This Post
Supporting Member of Barthmobile.com 1/21
Picture of Pirate19
posted Hide Post
Understanding the ever-growing importance for members to post information to source our dinosaurs' parts I had looked forward to doing so - but, naturally a twist.

I decided to attempt to get the caliper to hang up (jacked wheel, had helper activate brakes). The brake performed flawlessly. Please note that the brake hose was replaced in 2012, caliper in 2017.

And so, I ask:
What is the life expectancy of a brake hose?
Could the temperature of the fluid affect the performance of the hose?
Thanks.


'92 Breakaway
Cummins 190hp, No Modifications
Allison AT542
Floor Plan 30-BS-11B
9205-3798-30BS11B
 
Posts: 384 | Location: USA | Member Since: 11-07-2014Reply With QuoteReport This Post
Supporting Member of Barthmobile.com 03/22
posted Hide Post
I replaced all rubber brake hoses in 2016. I flush the brake system every year and noticed that in 2016 the brake fluid was very dark and had black pacticales in the fluid.

I didn't bother with Spartan I just took all the rubber hoses to Royal Brass our local hose and connector store. I had them make stainless braided hoses the same length and same fittings. I did this on my race cars years ago as stainless steel hoses do not expand anywhere near what rubber hoses do under high pressure.

On the race cars the brakes were much more responsive and brake were much more firm in application.

It took over 1 gallon of Dot 4 to finally flush all the rubber particles out of the Breakaway hydraulic system. I did notice the brakes did feel a bit more firm after the change to braided stainless steel hoses. Of course with air over hydraulic the brakes will have a lot more spongy feel than true hydraulic only system.


Ed
94 30' Breakaway #3864
30-BS-6B side entry
New Cummins 5.9L, 375+ HP
Allison 6 speed
Spartan chassis
K9DVC
Tankless water heater
 
Posts: 2176 | Location: Los Gatos, CA | Member Since: 12-08-2005Reply With QuoteReport This Post
  Powered by Social Strata  
 

    Forums    Tech Talk    Breakaway Brake Hose

This website is dedicated to the Barth Custom Coach, their owners and those who admire this American made, quality crafted, motor coach.
We are committed to the history, preservation and restoration of the Barth Custom Coach.