Screen Removal Bargman L-300 Door Handle brakes Satellite Fuel Tank Fire Extinguishers Roof Antenna Tech Talk Forum Shortcut Motor Oil Window Generators headlights batteries Radiator AC Unit Grab Handle Wiper Blades Wiper Blades Door Locks Door Locks Door Locks Door Locks Rims Front Shocks Rear Shocks Front Tires Oil Filter Steps Roof Vent Awning Propane Tank Mirror Info Clearance Lights Clearance Lights Clearance Lights Clearance Lights Clearance Lights Spartan Chassis Gillig Chassis Freightliner Chassis P-32 Chassis MCC Chassis
    Forums    Tech Talk    front wheel stud nuts
Go to...
Start A New Topic
Search
Notify
Tools
Reply To This Topic
  
front wheel stud nuts
 Login now/Join our community
 
posted
While having new tires installed recently on my friends 91 breakaway 28 ft. 5.9 allison 4 sp . the worker damaged one of the stud nuts & we can t seem to find a replacememt here in Canada, could someone out there enlighten us about this? I believe the wheel nuts & studs are left hand thread is this correct ? Thanks all Paul Finley /Baby Barth . Fenelon Falls Ont. / Cedar Key Fl. & now stuck in Parrsboro Nova Scotia
 
Posts: 87 | Location: fenelon falls ont. | Member Since: 06-27-2012Reply With QuoteReport This Post
posted Hide Post
Hello Baby Barth, try "Euclid E-9011-L" single-ended stud. I bought them from Heavy Duty Parts. Don't ask me how I know. We own a 1993 Breakaway.

Good Luck,

John
 
Posts: 55 | Location: Central Pa. | Member Since: 03-24-2019Reply With QuoteReport This Post
posted Hide Post
Thanks John but we are looking a source for the left hand threaded wheel nut. I think these are all dana axles so should still be available even though were likely only on 1990 s equipment. Perhaps someone knows of a person parting out awrecked barth .
 
Posts: 87 | Location: fenelon falls ont. | Member Since: 06-27-2012Reply With QuoteReport This Post
Supporting Member of Barthmobile.com 4/08
posted Hide Post
The left side are left hand thread. I buy them at our local truck parts here in Yuma. There is nothing specail about them. They are the same as the 22" wheels.


'92 Barth Breakaway - 30'
5.9 Cummins (6B) 300+ HP
2000 Allison
Front entrance
 
Posts: 1183 | Location: Minneapolis/Yuma | Member Since: 08-17-2006Reply With QuoteReport This Post
Supporting Member of Barthmobile.com 4/08
posted Hide Post
[QUOTE]Originally posted by Gary Carter:
The left side are left hand thread. I buy them at our local truck parts here in Yuma. There is nothing specal about them. They are the same as the 22" wheels.

Also check out truck tire stores. They inventory this stuff.


'92 Barth Breakaway - 30'
5.9 Cummins (6B) 300+ HP
2000 Allison
Front entrance
 
Posts: 1183 | Location: Minneapolis/Yuma | Member Since: 08-17-2006Reply With QuoteReport This Post
posted Hide Post
Sorry Baby Barth, I didn't do a very good job answering your question. The wheel lug nut is 3/4" 16 UNF 2A left hand threads. Gary Carter is right. There shouldn't be anything special about them other than they are left-handed. I believe twenty four manufacturers including Budd, Euclid, & Dana Spicer, etc carry a 3/4" 16 wheel nut. Euclid's part # is 5625(I believe but am not positive). I'll try to improve my reading comprehension next time.

Good Luck,

John
 
Posts: 55 | Location: Central Pa. | Member Since: 03-24-2019Reply With QuoteReport This Post
posted Hide Post
Thanks John & Gary that is all helpful
 
Posts: 87 | Location: fenelon falls ont. | Member Since: 06-27-2012Reply With QuoteReport This Post
  Powered by Social Strata  
 

    Forums    Tech Talk    front wheel stud nuts

This website is dedicated to the Barth Custom Coach, their owners and those who admire this American made, quality crafted, motor coach.
We are committed to the history, preservation and restoration of the Barth Custom Coach.