Screen Removal Bargman L-300 Door Handle brakes Satellite Fuel Tank Fire Extinguishers Roof Antenna Tech Talk Forum Shortcut Motor Oil Window Generators headlights batteries Radiator AC Unit Grab Handle Wiper Blades Wiper Blades Door Locks Door Locks Door Locks Door Locks Rims Front Shocks Rear Shocks Front Tires Oil Filter Steps Roof Vent Awning Propane Tank Mirror Info Clearance Lights Clearance Lights Clearance Lights Clearance Lights Clearance Lights Spartan Chassis Gillig Chassis Freightliner Chassis P-32 Chassis MCC Chassis
    Forums    Tech Talk    Timing a 454
Page 1 2 
Go to...
Start A New Topic
Search
Notify
Tools
Reply To This Topic
  
Timing a 454
 Login now/Join our community
 
Supporting Member of Barthmobile.com 6/12
Formally known as "Humbojb"
Picture of Jim and Tere
posted
This is going to sound silly, but how do you time a 454 in an 85 Regal? I mean, I know how to hook up the timing light and all that stuff, but how in the world can you position your eyeball to see the mark? My son-in-law was up here last night and he's pretty good but there was no way he could get in a position to see the mark. Are we relagated to the 'time by drive' method? As in warm it up, floor it up hill, if it pings, back it off, if it doesn't advance it, until you're just at the place before it starts to ping.
Like I said, pretty stupid. Frowner
Jim


Jim and TereJim and Tere

1985 Regal
29' Chevy 454 P32
8411 3172 29FP3B
Gear Vendor 6 Speed Tranny
 
Posts: 3696 | Location: madisonville tn usa | Member Since: 02-19-2005Reply With QuoteReport This Post
First Month Member
Supporting Member of Barthmobile.com 11/13
posted Hide Post
No, that's not stupid.

That's perhaps the best way. I do it every time I climb a hill. In fact, many computerized cars use a knock sensor to back off the spark until the pinging stops. It is best done on a hot day and a steep hill.

Many 454 motor homers use more advance than the sticker setting, anyway.

The P30 454 is timed from underneath. On person reads the timing marks illuminated by the light and then runs upstairs to make corrections. If this is no fun, a second person can make the corrections on command from the person underneath. I have a degree scale mounted around the distributor hole and a pointer on the distributor.


.

84 30T PeeThirty-Something, 502 powered
 
Posts: 6169 | Location: AZ Central Highlands | Member Since: 01-09-2001Reply With QuoteReport This Post
"Host" of Barthmobile.com
Supporting Member of Barthmobile.com 1/19
Picture of Bill N.Y.
posted Hide Post
Pull off the cap and the rotor to check this...

Inspect the 2 weights in the distributor. If they are sticking, seized or the 2 springs (pictured in Orange) are missing you'll need to address this too. Big time issues on the distributors as the lack of use will contribute to this condition.



Also, with the cap off, suck a little air out of the hose that is attached to the distributor to see if the vacuum advance is working. I use a suction tool for this but a mouth on a clean hose will work too. Just make sure it'll hold the vacuum too.


˙ʎ˙u ןןıq- „ǝןƃuɐ ʇuǝɹǝɟɟıp ɐ ɯoɹɟ pןɹoʍ ǝɥʇ ʇɐ ʞooן ɐ ƃuıʞɐʇ sı ǝɟıן oʇ ʇǝɹɔǝs ǝɥʇ„

Regis Widebody1990 Barth Regis Widebody
8908 0128 40RDS-C1
L-10 Cummins
Allison MT647 Transmission
Spartan Chassis
Regal Conversion1991 Medical Lab Conversion
9102 3709 33S-12
Ford 460 MPFI
C6 Transmission
Oshkosh Chassis



Quick Link: Members Only Link To Send Me A Private Message
 
Posts: 5924 | Location: Newburgh, New York | Member Since: 05-10-2003Reply With QuoteReport This Post
First Month Member
Supporting Member of Barthmobile.com 11/13
posted Hide Post
While you have the cap off, check for the Red Dust of Death. If it builds up inside the cap, it can cause problems.

Lightly lube the centrifugal mechanism, then wipe it clean.

Check the flexible wires to the stuff inside. Sometimes it starts to wear or break.


.

84 30T PeeThirty-Something, 502 powered
 
Posts: 6169 | Location: AZ Central Highlands | Member Since: 01-09-2001Reply With QuoteReport This Post
Picture of BarthBluesmobile
posted Hide Post
This opens up a whole new realm of concern. It is possible to tune the advance curve of the HEI distributor with a proper selection of weights, springs, and plates.

Summit Racing offers a slew of products, for weight kits and vacuum advance kits.

Over at http://www.irv2.com/forums/f65...pg-issue-56279.html a guy named Jim Elliott is offering what to my level of awareness seems to be good advice:

"All of those "Over the counter" centers & weights are junk...Stock 375 centers and 41 weights are what you are looking for cuz they provide a 22º mechanical advance. Might find some at the salvage yard, Just look at some older points distributers cuz they will fit the HEI.
The 375 & 41 are self stopping around 22º mechanical....Lighter springs are for faster advance, The present springs are good for garage doors..
Springs are difficult setting up and thats why I say find someone with the ignition curve machine for proper setup, With the 3 speed trannie I would have the mechanical advance ALL IN by 3,000 RPM.
When you get that mess setup then the vacuum advance must be cut back cuz the norm is 25º vacuum advance which will be way toooo much and thats what GM sets the stock settings (smog).
(Stock) 4º base, 16º mechanical along with VA of 25º = 45º runing down the slab with good vacuum (above 6-7")...My way is
10º base, 22º mechanical and vacuum can set at 10º for a total of 42º, Remember with hill climbs with little to NO vacuum the stock setup is limiting you to 20º max...New setup with the properly curve dist with NO VACUUM is 32º up the hill which is a huge difference and allows your engine to run much cooler..
"

This is making me think I should have found a distributor specialist with an advance testing machine last year. It looks like a specialist would need to have a Sun 504 machine.

It looks like there is some optimization of the curve that can be done to assist with power, fuel economy, and keeping the engine running cooler.

happy motoring!
Matt


1987 Barth 27' P32 Chassis
Former State Police Command Post
Chevrolet 454
Weiand Manifold, Crane Cam, Gibson Exhaust
 
Posts: 523 | Location: Massachusetts | Member Since: 07-28-2006Reply With QuoteReport This Post
Supporting Member of Barthmobile.com 8/11
Picture of billyt53
posted Hide Post
The timing tab for Motorhome 454's is down below at about the 5 o'clock position as viewed from the front, if memory serves and I believe you use the number 8 cylinder to set it. PM me and I will pull the manual. Make SURE you can "twist" the rotor which would indicate the mechanical advance is not stuck. Those '80's HEI's had a problem with that. If it needs lube, DO NOT USE WD40! It will explode as the engine warms up and the stuff starts to vaporize in the distributor.
Billy T


Billy & Helen Thibodeaux

Retired from Billy Thibodeaux's Premiere RV, Inc. Scott, LA 70583 I-10 Exit 97
The Farm is near Duson, LA I-10 Exit 92 then N 1 mile on right
Three Full 50 Amp RV Hookups !
billynhelen@me.com
Data Tag: 9404-3908-36XI-2C
1994 Sovereign 36' Widebody on Spartan IC (Mountain Master Lite) Chassis.
Powered by Cummins ISL9-450
Onan 8,000 Quiet Diesel Genset
Toad: 2018 Chevy Colorado ZR2 Diesel with M&G Car Brake
 
Posts: 373 | Location: 1mile north of I-10 Exit 92, Duson, LA USA in The Heart of CAJUN COUNRTY ! ! ! | Member Since: 05-14-2005Reply With QuoteReport This Post
Supporting Member of Barthmobile.com 8/10
posted Hide Post
Oh, for the simpler times 35 years ago in highschool when you could time the Beetle with a the engine off and a 12v light.....K&E
 
Posts: 429 | Location: The Great Midwest | Member Since: 12-04-2009Reply With QuoteReport This Post
"Host" of Barthmobile.com
Supporting Member of Barthmobile.com 1/19
Picture of Bill N.Y.
posted Hide Post
quote:
Originally posted by billyt53:
If it needs lube, DO NOT USE WD40! It will explode as the engine warms up and the stuff starts to vaporize in the distributor.
Wow... that's good to know. Eeker

If memory serves correctly, I have used white lithium and maybe sewing machine oil in a small dripper can before. What would you recommend?

Big Grin I don't run into many distributors on the big diesel engines. mechanic


˙ʎ˙u ןןıq- „ǝןƃuɐ ʇuǝɹǝɟɟıp ɐ ɯoɹɟ pןɹoʍ ǝɥʇ ʇɐ ʞooן ɐ ƃuıʞɐʇ sı ǝɟıן oʇ ʇǝɹɔǝs ǝɥʇ„

Regis Widebody1990 Barth Regis Widebody
8908 0128 40RDS-C1
L-10 Cummins
Allison MT647 Transmission
Spartan Chassis
Regal Conversion1991 Medical Lab Conversion
9102 3709 33S-12
Ford 460 MPFI
C6 Transmission
Oshkosh Chassis



Quick Link: Members Only Link To Send Me A Private Message
 
Posts: 5924 | Location: Newburgh, New York | Member Since: 05-10-2003Reply With QuoteReport This Post
First Month Member
Supporting Member of Barthmobile.com 11/13
posted Hide Post
quote:
Originally posted by BarthBluesmobile:
This opens up a whole new realm of concern. It is possible to tune the advance curve of the HEI distributor with a proper selection of weights, springs, and plates.

Summit Racing offers a slew of products, for weight kits and vacuum advance kits.

Over at http://www.irv2.com/forums/f65...pg-issue-56279.html a guy named Jim Elliott is offering what to my level of awareness seems to be good advice:

"All of those "Over the counter" centers & weights are junk...Stock 375 centers and 41 weights are what you are looking for cuz they provide a 22º mechanical advance. Might find some at the salvage yard, Just look at some older points distributers cuz they will fit the HEI.
The 375 & 41 are self stopping around 22º mechanical....Lighter springs are for faster advance, The present springs are good for garage doors..
Springs are difficult setting up and thats why I say find someone with the ignition curve machine for proper setup, With the 3 speed trannie I would have the mechanical advance ALL IN by 3,000 RPM.
When you get that mess setup then the vacuum advance must be cut back cuz the norm is 25º vacuum advance which will be way toooo much and thats what GM sets the stock settings (smog).
(Stock) 4º base, 16º mechanical along with VA of 25º = 45º runing down the slab with good vacuum (above 6-7")...My way is
10º base, 22º mechanical and vacuum can set at 10º for a total of 42º, Remember with hill climbs with little to NO vacuum the stock setup is limiting you to 20º max...New setup with the properly curve dist with NO VACUUM is 32º up the hill which is a huge difference and allows your engine to run much cooler..
"


Matt


I have known Jim for years, and his advice is Golden. Interestingly enough, we both know and use the same distributor guy. Or did, until he retired and moved.

The problem is, the weights he calls out are hard to find. Before I met Jim, I had a several 454s, and had ended up somewhere close. My 502 requires different curving, though, so I can't offer any exact advice.

I use welded weights and a Crane vacuum can to get close. Then I fine tune it as I drive with an MSD 6E ignition unit with their cockpit advance control, so my curve doesn't have to be exact. I find that temperature, grade, load (toad, boat or solo), quality of gas, and altitude all change my optimum timing, anyway, so one curve will never fit all.


.

84 30T PeeThirty-Something, 502 powered
 
Posts: 6169 | Location: AZ Central Highlands | Member Since: 01-09-2001Reply With QuoteReport This Post
Supporting Member of Barthmobile.com 2/16
Captain Doom
Picture of Rusty
posted Hide Post
quote:
If memory serves correctly, I have used white lithium and maybe sewing machine oil in a small dripper can before. What would you recommend?


The best product is Super Lube General Purpose Grease, available at Harbor Freight. If the shaft can't be pulled from the housing, Super lube precision applicator or SL aerosol.


Rusty


MilSpec AMG 6.5L TD 230HP; built-to-order by Peninsular Engines:  Hi-pop injectors, gear-driven camshaft, non-waste-gated, high-output turbo, 18:1 pistons.  Fuel economy increased by 15-20%, power, WOW!"StaRV II"

'94 28' Breakaway: MilSpec AMG 6.5L TD 230HP

Nelson and Chester, not-spoiled Golden Retrievers

Sometimes I think we're alone in the universe, and sometimes I think we're not.
In either case the idea is quite staggering.
- Arthur C. Clarke

It was a woman who drove me to drink, and I've been searching thirty years to find her and thank her - W. C. Fields
 
Posts: 7734 | Location: Brooker, FL, USA | Member Since: 09-08-2005Reply With QuoteReport This Post
Supporting Member of Barthmobile.com 6/12
Formally known as "Humbojb"
Picture of Jim and Tere
posted Hide Post
Bill H, when you say the 454 is timed from underneath, do you mean laying on your back, looking up at the front pulley? Dan,(son-in-law) kept trying to find a way to look down from the top as you do in a car with a hood on it and he just couldn't see the mark.


Jim and TereJim and Tere

1985 Regal
29' Chevy 454 P32
8411 3172 29FP3B
Gear Vendor 6 Speed Tranny
 
Posts: 3696 | Location: madisonville tn usa | Member Since: 02-19-2005Reply With QuoteReport This Post
First Month Member
Supporting Member of Barthmobile.com 11/13
posted Hide Post
quote:
Originally posted by Jim and Tere:
Bill H, when you say the 454 is timed from underneath, do you mean laying on your back, looking up at the front pulley?


Yup.


.

84 30T PeeThirty-Something, 502 powered
 
Posts: 6169 | Location: AZ Central Highlands | Member Since: 01-09-2001Reply With QuoteReport This Post
First Month Member
Supporting Member of Barthmobile.com 11/13
posted Hide Post
Do I get a prize for the shortest post on this forum?


.

84 30T PeeThirty-Something, 502 powered
 
Posts: 6169 | Location: AZ Central Highlands | Member Since: 01-09-2001Reply With QuoteReport This Post
Glassnose Aficionado
Supporting Member of Barthmobile.com 2/09
Picture of Danny Z
posted Hide Post
No


79 Barth Classic
 
Posts: 3476 | Location: Venice Fl. | Member Since: 07-12-2004Reply With QuoteReport This Post
First Month Member
Supporting Member of Barthmobile.com 11/13
posted Hide Post
I considered saying "ja", "da" or "si", but that would have been stretching it.


.

84 30T PeeThirty-Something, 502 powered
 
Posts: 6169 | Location: AZ Central Highlands | Member Since: 01-09-2001Reply With QuoteReport This Post
  Powered by Social Strata Page 1 2  
 

    Forums    Tech Talk    Timing a 454

This website is dedicated to the Barth Custom Coach, their owners and those who admire this American made, quality crafted, motor coach.
We are committed to the history, preservation and restoration of the Barth Custom Coach.