Screen Removal Bargman L-300 Door Handle brakes Satellite Fuel Tank Fire Extinguishers Roof Antenna Tech Talk Forum Shortcut Motor Oil Window Generators headlights batteries Radiator AC Unit Grab Handle Wiper Blades Wiper Blades Door Locks Door Locks Door Locks Door Locks Rims Front Shocks Rear Shocks Front Tires Oil Filter Steps Roof Vent Awning Propane Tank Mirror Info Clearance Lights Clearance Lights Clearance Lights Clearance Lights Clearance Lights Spartan Chassis Gillig Chassis Freightliner Chassis P-32 Chassis MCC Chassis
    Forums    Tech Talk    Gillig Transmission Shifters
Go to...
Start A New Topic
Search
Notify
Tools
Reply To This Topic
  
Gillig Transmission Shifters
 Login now/Join our community
 
Supporting Member of Barthmobile.com 3/11
Picture of Tom  and Julie
posted
To those of us with Gillig chassis and the Allison series transmissions I have a referral source for problems. The air/electric shifters were made by Stone Bennett Company and I was having intermittant signals on the little display on the dash. It would flicker or just go out - the coach and transmission worked fine. I called T.H. Anderson Company in Kilgore Texas (800) 594-7867 and they have former Gillig experts that know this stuff well. They walked me through the test procedure, the wiring harnesses and the grounds (those ugly grounds again) that power the indicators and relays. If you are having similar issues you can call them and they know what we need to do.


1993 32' Regency Wide Body, 4 speed Allison Trans, Front Entry door, Diamond Plate aluminum roof &
1981 Euro 22' w Chevy 350 engine and TH 400 tranny
 
Posts: 1515 | Location: Houston Texas | Member Since: 12-19-2006Reply With QuoteReport This Post
Supporting Member of Barthmobile.com 03/10
Picture of sky
posted Hide Post
Tom, did you find the culprit? Please inform. Thanks. sky


1990 Barth Regency
32RDGB1 Wide Body
3208 Cat 250 HP
Gillig Chassis
Center aisle
 
Posts: 454 | Location: Murphy, NC | Member Since: 03-01-2006Reply With QuoteReport This Post
Supporting Member of Barthmobile.com 3/11
Picture of Tom  and Julie
posted Hide Post
There are seven grounds in the transmission shifter box that must be cleaned. The indicator works off of the electric shifter moving across brass posts to supply a ground to the indicator. The posts and springs have to be cleaned and the ground straps removed cleaned and replaced. I am just starting but will let you know.


1993 32' Regency Wide Body, 4 speed Allison Trans, Front Entry door, Diamond Plate aluminum roof &
1981 Euro 22' w Chevy 350 engine and TH 400 tranny
 
Posts: 1515 | Location: Houston Texas | Member Since: 12-19-2006Reply With QuoteReport This Post
Picture of Corco
posted Hide Post
Hi Tom K,

Did you find that the grounds were the cause?
 
Posts: 36 | Location: Northern Atlanta Burbs', Georgia | Member Since: 06-24-2012Reply With QuoteReport This Post
Supporting Member of Barthmobile.com 3/11
Picture of Tom  and Julie
posted Hide Post
Yes, the housing is locatedon the curb sideof the transmission and can be reoved with wrenches. Then just use very fine sandpaper and carb cleaner on the posts and the slide. I added some contact spray cleaner and somendielectric grease and sealed upnthe housing. After thatnit works fine.


1993 32' Regency Wide Body, 4 speed Allison Trans, Front Entry door, Diamond Plate aluminum roof &
1981 Euro 22' w Chevy 350 engine and TH 400 tranny
 
Posts: 1515 | Location: Houston Texas | Member Since: 12-19-2006Reply With QuoteReport This Post
Supporting Member of Barthmobile.com 8/10
Picture of Medic37
posted Hide Post
That shifter is not only on The Gillig.

Nice find...

...mine shows some weird stuff on the display at time as well.


~Mac~

1990 31 Foot Regency
Spartan Chassis
Cummins 6CTA8.3
Alison MT643, 4-speed
8905-0123-31RDS-A2
 
Posts: 259 | Location: Sand Creek Township, Minnesota | Member Since: 06-21-2005Reply With QuoteReport This Post
Picture of Corco
posted Hide Post
Thank you Tom K for the update. Nice troubleshooting.
 
Posts: 36 | Location: Northern Atlanta Burbs', Georgia | Member Since: 06-24-2012Reply With QuoteReport This Post
posted Hide Post
I have the same shiftier but mine will only shift up and not down.
 
Posts: 1 | Location: south jersey | Member Since: 10-20-2020Reply With QuoteReport This Post
Supporting Member of Barthmobile.com 3/11
Picture of Tom  and Julie
posted Hide Post
The indicator is attached to the shifter but does not control the transmission. If you have shifting problems that will be independent of the indicator and could be the air connections or possibly internal issues. I believe the Barth Manuals include a book on the Allison and it has all the information necessary for a transmission shop to diagnose shifting issues. You can also get new Stone indicator parts from the company I included in earlier posts.


1993 32' Regency Wide Body, 4 speed Allison Trans, Front Entry door, Diamond Plate aluminum roof &
1981 Euro 22' w Chevy 350 engine and TH 400 tranny
 
Posts: 1515 | Location: Houston Texas | Member Since: 12-19-2006Reply With QuoteReport This Post
  Powered by Social Strata  
 

    Forums    Tech Talk    Gillig Transmission Shifters

This website is dedicated to the Barth Custom Coach, their owners and those who admire this American made, quality crafted, motor coach.
We are committed to the history, preservation and restoration of the Barth Custom Coach.