Barthmobile Portal
Gillig Transmission Shifters

This topic can be found at:
https://www.barthmobile.com/eve/forums/a/tpc/f/3631087061/m/2941081403

02-25-2008, 11:08 AM
Tom and Julie
Gillig Transmission Shifters
To those of us with Gillig chassis and the Allison series transmissions I have a referral source for problems. The air/electric shifters were made by Stone Bennett Company and I was having intermittant signals on the little display on the dash. It would flicker or just go out - the coach and transmission worked fine. I called T.H. Anderson Company in Kilgore Texas (800) 594-7867 and they have former Gillig experts that know this stuff well. They walked me through the test procedure, the wiring harnesses and the grounds (those ugly grounds again) that power the indicators and relays. If you are having similar issues you can call them and they know what we need to do.


1993 32' Regency Wide Body, 4 speed Allison Trans, Front Entry door, Diamond Plate aluminum roof &
1981 Euro 22' w Chevy 350 engine and TH 400 tranny
02-25-2008, 12:25 PM
sky
Tom, did you find the culprit? Please inform. Thanks. sky


1990 Barth Regency
32RDGB1 Wide Body
3208 Cat 250 HP
Gillig Chassis
Center aisle
02-25-2008, 10:08 PM
Tom and Julie
There are seven grounds in the transmission shifter box that must be cleaned. The indicator works off of the electric shifter moving across brass posts to supply a ground to the indicator. The posts and springs have to be cleaned and the ground straps removed cleaned and replaced. I am just starting but will let you know.


1993 32' Regency Wide Body, 4 speed Allison Trans, Front Entry door, Diamond Plate aluminum roof &
1981 Euro 22' w Chevy 350 engine and TH 400 tranny
07-08-2012, 05:29 AM
Corco
Hi Tom K,

Did you find that the grounds were the cause?
07-08-2012, 07:58 AM
Tom and Julie
Yes, the housing is locatedon the curb sideof the transmission and can be reoved with wrenches. Then just use very fine sandpaper and carb cleaner on the posts and the slide. I added some contact spray cleaner and somendielectric grease and sealed upnthe housing. After thatnit works fine.


1993 32' Regency Wide Body, 4 speed Allison Trans, Front Entry door, Diamond Plate aluminum roof &
1981 Euro 22' w Chevy 350 engine and TH 400 tranny
07-08-2012, 11:00 AM
Medic37
That shifter is not only on The Gillig.

Nice find...

...mine shows some weird stuff on the display at time as well.


~Mac~

1990 31 Foot Regency
Spartan Chassis
Cummins 6CTA8.3
Alison MT643, 4-speed
8905-0123-31RDS-A2
07-08-2012, 11:52 AM
Corco
Thank you Tom K for the update. Nice troubleshooting.
10-20-2020, 03:26 PM
Kylen
I have the same shiftier but mine will only shift up and not down.
10-21-2020, 08:07 AM
Tom and Julie
The indicator is attached to the shifter but does not control the transmission. If you have shifting problems that will be independent of the indicator and could be the air connections or possibly internal issues. I believe the Barth Manuals include a book on the Allison and it has all the information necessary for a transmission shop to diagnose shifting issues. You can also get new Stone indicator parts from the company I included in earlier posts.


1993 32' Regency Wide Body, 4 speed Allison Trans, Front Entry door, Diamond Plate aluminum roof &
1981 Euro 22' w Chevy 350 engine and TH 400 tranny