Screen Removal Bargman L-300 Door Handle brakes Satellite Fuel Tank Fire Extinguishers Roof Antenna Tech Talk Forum Shortcut Motor Oil Window Generators headlights batteries Radiator AC Unit Grab Handle Wiper Blades Wiper Blades Door Locks Door Locks Door Locks Door Locks Rims Front Shocks Rear Shocks Front Tires Oil Filter Steps Roof Vent Awning Propane Tank Mirror Info Clearance Lights Clearance Lights Clearance Lights Clearance Lights Clearance Lights Spartan Chassis Gillig Chassis Freightliner Chassis P-32 Chassis MCC Chassis
    Forums    Tech Talk    23ft '75 P30 Strut Recommendations?
Go to...
Start A New Topic
Search
Notify
Tools
Reply To This Topic
  
23ft '75 P30 Strut Recommendations?
 Login now/Join our community
 
posted
I've pulled the front struts out and they're gonzo. Munro 34817's. Can anyone save me a little time and recommend a strut of the correct weight rating? The websites don't seem to list this info and before I get too deeply into it if someone has "been there done that" and could save me some time I would very much appreciate it.

I came across a 2009 thread (Thanks John C.) in which a similar Barth to mine was weighed and the results make me apprehensive of just throwing the stock spec ones back on.

following is a copy/paste of that post:

Got back from the scale. 1/2 tank of fuel in each tank, no water, no waste, no gear, and no food. Just me and the coach. Front = 4760lbs Rear = 5160lbs no generator in the back, it is out for maint. I wonder how many of these are running around well over GVW in the front? my max front is 4880lbs, so even with just my wife up front we are over max. _________________________
1975 23' 454


Here is a link to Rockauto page with their various options:

https://www.rockauto.com/en/ca...,shock+absorber,7556

Further if anyone has the spec for measuring the spring length to see if I need to replace them as well that would be helpful.

Timothy
 
Posts: 28 | Location: Alberta, Canada | Member Since: 08-04-2019Reply With QuoteReport This Post
Supporting Member of Barthmobile.com 7/17
Picture of Doorman
posted Hide Post
info for you.chassis alignment


1986 31' Regal -1976 Class C
454/T400 P30 -350/T400 G30
twin cntr beds - 21' rear bath
 
Posts: 1026 | Location: Dayton, Ohio | Member Since: 09-27-2009Reply With QuoteReport This Post
Official Barth Junkie
Supporting Member of Barthmobile.com 1/24
Picture of Steve VW
posted Hide Post
Try here. 79-86 but should be close:

https://www.barthmobile.com/eve...223976097#2223976097


9708-M0037-37MM-01
"98" Monarch 37
Spartan MM, 6 spd Allison
Cummins 8.3 325+ hp
 
Posts: 5168 | Location: Kalkaska, MI | Member Since: 02-04-2011Reply With QuoteReport This Post
posted Hide Post
Thank you, thank you, thank you!
 
Posts: 28 | Location: Alberta, Canada | Member Since: 08-04-2019Reply With QuoteReport This Post
Official Barth Junkie
Supporting Member of Barthmobile.com 1/24
Picture of Steve VW
posted Hide Post
That has some good stuff on fuel system problems and vapor lock issues. Since you are in the position to replace you can also upgrade.

The fuel system in my Regal was the source of numerous problems until I installed good filters, pumps, etc. good luck


9708-M0037-37MM-01
"98" Monarch 37
Spartan MM, 6 spd Allison
Cummins 8.3 325+ hp
 
Posts: 5168 | Location: Kalkaska, MI | Member Since: 02-04-2011Reply With QuoteReport This Post
Picture of Doug Smiley
posted Hide Post
check this out:

https://www.gmcmi.com/wp-conte...0-Chassis-Manual.pdf


_________________________

The 82 MCC {by Barth}
is not an rv--
it is a Motor Coach!!


 
Posts: 2587 | Location: Nova Scotia | Member Since: 12-08-2006Reply With QuoteReport This Post
Supporting Member of Barthmobile.com 3/23
Picture of Duane88
posted Hide Post
Geez Nose is an 81, P30, it has only shocks and spring suspension in front. Timothy I have 16 inch tires, do you have 19 inch?

Oh got to thinking you may be calling your shocks, struts, Canada English. Sorry So shocks do not do much loading carrying, the newer style gas units carry a bit of load, or you can put on air shocks, to lift you front end a bit if you like and carry load. Shocks to fit your P30 are measured by contracted and extended length, so you have a ton of choices. Newer style gas shocks might be what you seek, just pick the correct lengths. Same for the steering damper, if you buy it as a damper they like to charge you like triple, but here you probably want a hydraulic fluid shock. I bet your front spring air bags are shot too, mine were look in the front springs for remnants. When I replaced my air bags the handling and ride improved a lot. I did not do springs.

Benebob did a lot of work finding rear springs for his P30 I will see if I can find that thread or just search his posts.


1971 24 ft Barth Continental
P30 chassis
350 engine
 
Posts: 2047 | Location: Clinton Iowa | Member Since: 04-02-2017Reply With QuoteReport This Post
posted Hide Post
Sorry I was using the incorrect wording. My original post was referring to the damper. I am now on to ball joints and am further confused. When looking at parts they say 11000 GVR or 14000 GVR, the gvr for mine is 12880. If I purchase the 14000s will they fit?
 
Posts: 28 | Location: Alberta, Canada | Member Since: 08-04-2019Reply With QuoteReport This Post
Supporting Member of Barthmobile.com 3/23
Picture of Duane88
posted Hide Post
I have not replaced my ball joints, however if you do not have the 14000# ball joints now there is a difference to the 11000# joints, with your GVW I believe you need the 14000# GM would not use less than GVW. The worse that can happen is you have to get the other and return them, not a big deal at Rockauto. They are cheap buy them both return the one you do not use...

Timothy please do not take me seriously, I was teasing about you being a Canadian and having your own language , if I was out of line please accept my apology. Those of us from Minnesnowta are much worse!!! ROTFLMAO


1971 24 ft Barth Continental
P30 chassis
350 engine
 
Posts: 2047 | Location: Clinton Iowa | Member Since: 04-02-2017Reply With QuoteReport This Post
posted Hide Post
I can't return stuff to Rockauto, the shipping eats up the return. I actually think for the time being most of my joints are good but the cracked boots will make quick work of them when I begin to drive it. Nevertheless I think I'll wait for that.

I thought the Canadian comment was pretty funny.
 
Posts: 28 | Location: Alberta, Canada | Member Since: 08-04-2019Reply With QuoteReport This Post
Supporting Member of Barthmobile.com 3/22
Picture of Dana
posted Hide Post
quote:
Originally posted by Duane88:

Timothy please do not take me seriously, I was teasing about you being a Canadian and having your own language , if I was out of line please accept my apology. Those of us from Minnesnowta are much worse!!! ROTFLMAO


Duane I am deeply offended. I am going to have to affect the weather to send more rain into the Mississippi River for you.


Dana & Lynn
1997 38ft Monarch front entry
Spartan Mountain Master Chassis
Cummins 8.3 325hp
Allison MD-3060 6 speed
22.5 11R
Cummins Factory Exhaust Brake
8000 watt Quiet Diesel Generator
9608-M0022-38MI-4C
Christened Midnight

1972 22ft
Christened Camp Barth
 
Posts: 1384 | Location: Waseca, Minnesota | Member Since: 12-09-2010Reply With QuoteReport This Post
Supporting Member of Barthmobile.com 3/23
Picture of Duane88
posted Hide Post
quote:
Originally posted by Dana:
quote:
Originally posted by Duane88:

Timothy please do not take me seriously, I was teasing about you being a Canadian and having your own language , if I was out of line please accept my apology. Those of us from Minnesnowta are much worse!!! ROTFLMAO


Duane I am deeply offended. I am going to have to affect the weather to send more rain into the Mississippi River for you.


Sure the river here is at a point where I can almost go Bass fishing, for the first time this year!!! I was going to go next week, now I am broken hearted...Perhaps I can stop any moisture from getting up there through Iowa!!!!


1971 24 ft Barth Continental
P30 chassis
350 engine
 
Posts: 2047 | Location: Clinton Iowa | Member Since: 04-02-2017Reply With QuoteReport This Post
Picture of Doug Smiley
posted Hide Post
Did you check here

http://www.rvretailcatalog.com/


_________________________

The 82 MCC {by Barth}
is not an rv--
it is a Motor Coach!!


 
Posts: 2587 | Location: Nova Scotia | Member Since: 12-08-2006Reply With QuoteReport This Post
Supporting Member of Barthmobile.com 3/23
Picture of Duane88
posted Hide Post
I have heard some folks cut an old inner tube in a strip a bit wider than the tear, wrap it around the old boot and tie it off with zip ties, for extra security a few slits near the edges of the repair material may help hold the ties in place. Never tried it my self, cheap might work.


1971 24 ft Barth Continental
P30 chassis
350 engine
 
Posts: 2047 | Location: Clinton Iowa | Member Since: 04-02-2017Reply With QuoteReport This Post
  Powered by Social Strata  
 

    Forums    Tech Talk    23ft '75 P30 Strut Recommendations?

This website is dedicated to the Barth Custom Coach, their owners and those who admire this American made, quality crafted, motor coach.
We are committed to the history, preservation and restoration of the Barth Custom Coach.