Barthmobile Portal
Spartan 2000 spring bushings

This topic can be found at:
https://www.barthmobile.com/eve/forums/a/tpc/f/3631087061/m/1943982397

10-11-2019, 08:22 PM
Gary Carter
Spartan 2000 spring bushings
This is an ongoing question. A few or more years back I ordered spring bushings for the Breakaway for all wheels. They sent me 8 bushings for the springs but not the 4 shackle. Now trying to find these parts. I know Ed was working on a source after searching the forums.

So anyone with current part numbers and/or sources.

Also has anyone used the polyethylene replacement bushings.


'92 Barth Breakaway - 30'
5.9 Cummins (6B) 300+ HP
2000 Allison
Front entrance
10-11-2019, 09:32 PM
Harold,Cat&Sam
I've run polyethylene bushings in different 4x4 vehicles and they seem to work fine .

I ran across this article .
https://www.suspension.com/blo...suspension-bushings/


Harold
Cat
Sam Miniature Schnauzer
3.8.2009 - 9.24.2021

93 30ft Breakaway
9209-3823-30BS-11B

KE5WCW
10-11-2019, 11:03 PM
Mogan David
quote:
Originally posted by Harold,Cat&Sam:
I've run polyethylene bushings in different 4x4 vehicles and they seem to work fine .

I ran across this article .
https://www.suspension.com/blo...suspension-bushings/


Good article.
Thanks for posting.
Replacement poly suspension bushings are a popular modification/improvement for MINI Cooper's. When I had it done, on my generation I MINI, I went with a more resilient poly than owners who want the utmost steering response. I don't know if there are choices of density when it comes to truck/coach suspension bushings.
10-12-2019, 08:32 AM
MWrench
You will not want to use poly bushings on leaf springs or leaf spring shackles. Bushings are pressed in and are part of the spring retention side to side, for extreme duty as in trucks and RVs I didn't find poly available. Further, I have used poly bushings in race set ups and it is fine, but in many application poly will not work. Any place where the poly is bonded to metal, it will work for awhile but not long depending on the stress applied.

For the spartan chassis Breakaway chassis EC2000 series, the correct aftermarket bushing replacement is:

Dayton RB-135

DO NOT try to order replacement from Spartan!! Their replacement has been changed and is larger in diameter both outer and inner, (now metric) and will not fit. Shackles are also different in their listing you can use but can not be
correctly installed.

Correct aftermarket shackle replacement number:

Dayton 330-375

It includes the RB-135 bushing already installed

My past posts about bushings and shackles



Previous post with part numbers


Ed
94 30' Breakaway #3864
30-BS-6B side entry
New Cummins 5.9L, 375+ HP
Allison 6 speed
Spartan chassis
K9DVC
Tankless water heater
10-12-2019, 09:30 AM
Harold,Cat&Sam
Correct spring end bushing parts can be sourced from Dayton parts.

Correct bushing part numbers: RB-135

Outer shell diameter: 1 3/4 inch
Outer shell length: 3.0 inch
Inner sleeve inside diameter: 3/4 inch
Inner sleeve length: 3 1/2 inch

Correct Dayton shackle part number: 330-375
Shackle has RB-135 bushing installed
Hole diameter of leg mounting: 3/4 inch
Shackle leg inside mounting width 3 1/2 inch

Thanks for the info Mr Ed Thumbs Up


Harold
Cat
Sam Miniature Schnauzer
3.8.2009 - 9.24.2021

93 30ft Breakaway
9209-3823-30BS-11B

KE5WCW
10-12-2019, 09:33 AM
Harold,Cat&Sam
Some day I intend to put the knowledge that I am learning from ya'll to use in our own Breakaway Tooling Along


Harold
Cat
Sam Miniature Schnauzer
3.8.2009 - 9.24.2021

93 30ft Breakaway
9209-3823-30BS-11B

KE5WCW
10-12-2019, 10:53 AM
Gary Carter
Thank you Dr. Ed. Missed the part number postings.


'92 Barth Breakaway - 30'
5.9 Cummins (6B) 300+ HP
2000 Allison
Front entrance
10-12-2019, 04:02 PM
Richard_Muise
Just replaced all my spring bushings. Got the parts from Spartan with no problems.


R.P.Muise 1994 Breakaway/Cummins 5.9/Allison transmission/Spartan Chassis
10-13-2019, 12:25 AM
Gary Carter
Ed. Is there any spring difference on yours because of the different axles? I would guess not but.


'92 Barth Breakaway - 30'
5.9 Cummins (6B) 300+ HP
2000 Allison
Front entrance
10-13-2019, 09:13 AM
MWrench
I checked that with others that had the Dana 80 rear end and yes the springs are different. Mine is rated at 13,500 lbs where the earlier were rated at 12,000 lbs. The "U" bolts are bigger in diameter and has an offset shape because the Eaton rear end on mine has a different mounting platform than the Dana 80.

Also the front on mine is rated at 6,500 lbs vs. 6,000 lbs. Same thing here, "U" bolts are bigger in diameter

I got drawings from Spartan and none of them matched what I have. Spartan's comment was that springs are often changed by the end user. The bushings and shackles are the same.

I had front springs rebuilt by Betts Springs, probably have rear rebuilt next summer.


Ed
94 30' Breakaway #3864
30-BS-6B side entry
New Cummins 5.9L, 375+ HP
Allison 6 speed
Spartan chassis
K9DVC
Tankless water heater
10-16-2019, 08:37 AM
Tom and Julie
The poly bushings are polyurethane, not polyethylene. For most applications the leader in the bushing industry is Energy Suspension Inc.


1993 32' Regency Wide Body, 4 speed Allison Trans, Front Entry door, Diamond Plate aluminum roof &
1981 Euro 22' w Chevy 350 engine and TH 400 tranny
10-16-2019, 09:21 AM
Harold,Cat&Sam
Thank you for the correction Thumbs Up


Harold
Cat
Sam Miniature Schnauzer
3.8.2009 - 9.24.2021

93 30ft Breakaway
9209-3823-30BS-11B

KE5WCW
10-16-2019, 02:43 PM
Doug Smiley
Catalogue here>> http://www.energysuspension.com/who-we-are.html


_________________________

The 82 MCC {by Barth}
is not an rv--
it is a Motor Coach!!


01-19-2020, 05:21 PM
Gary Carter
All the bushings have been replaced. WOW what a difference in driving. Have only driven it home from the shop and was impressed. Heading to Quartzsite tomorrow so will get a hundred mile trip to further test it out.


'92 Barth Breakaway - 30'
5.9 Cummins (6B) 300+ HP
2000 Allison
Front entrance
01-19-2020, 06:26 PM
Harold,Cat&Sam
Good deal .
Hope ya'll have a great trip .


Harold
Cat
Sam Miniature Schnauzer
3.8.2009 - 9.24.2021

93 30ft Breakaway
9209-3823-30BS-11B

KE5WCW