Barthmobile Portal
Picture of cummins 5.9 fuel solenoid

This topic can be found at:
https://www.barthmobile.com/eve/forums/a/tpc/f/3631087061/m/1753946197

06-22-2018, 06:15 PM
Richard_Muise
Picture of cummins 5.9 fuel solenoid
After I pulled into a campsite today and let the engine cool down, it would not restart. I had run a little hot climbing the Rocky Mountains, up to nearly 220. When I cracked it, it would not even fire which makes me suspect the fuel solenoid. Anyone have a picture of one so I know what I'm looking for? Can it be lubricated? Thanks.


R.P.Muise 1994 Breakaway/Cummins 5.9/Allison transmission/Spartan Chassis
06-22-2018, 09:40 PM
Steve VW
Most of my stuff is for the 8.3 C engine but they are similar.

The bracket that mounts the solenoid was broken. I removed the solenoid and bracket, then wired the fuel valve open. You have to go back and unwire it to stop the engine but it will get you going. New solenoid and bracket. 3 wires, they have two coils, for pick and hold.



On the 8.3 you can see the top of the solenoid to the left and down from the big intake pipe.(rusty bracket, next to red wire)



5.9 should be similar, good luck.


9708-M0037-37MM-01
"98" Monarch 37
Spartan MM, 6 spd Allison
Cummins 8.3 325+ hp
06-22-2018, 09:48 PM
Dana
Ahh but the other Aristocrat called and gave him a tutorial over the phone. He is running again and now knows where and what to check. Still not sure if it is the problem...


Dana & Lynn
1997 38ft Monarch front entry
Spartan Mountain Master Chassis
Cummins 8.3 325hp
Allison MD-3060 6 speed
22.5 11R
Cummins Factory Exhaust Brake
8000 watt Quiet Diesel Generator
9608-M0022-38MI-4C
Christened Midnight

1972 22ft
72081169MC22C
Christened Camp Barth
06-22-2018, 09:56 PM
Steve VW
Thumbs Up Mechanic Thumbs Up


9708-M0037-37MM-01
"98" Monarch 37
Spartan MM, 6 spd Allison
Cummins 8.3 325+ hp
06-23-2018, 08:19 AM
Kevin
quote:
Originally posted by Richard_Muise:
After I pulled into a campsite today and let the engine cool down, it would not restart. I had run a little hot climbing the Rocky Mountains, up to nearly 220. When I cracked it, it would not even fire which makes me suspect the fuel solenoid. Anyone have a picture of one so I know what I'm looking for? Can it be lubricated? Thanks.

Richard, you had an overheating problem at the Snowtan in Minnesota. I am not sure what you mean by "when I cracked it"? Our cummings owners may be able to shed light on your overheating problem. It might not be the radiator is dirty. My Caterpillar has a coolant filter with shut off valves. There could be valves on your cummings. How old is your antifreeze and is it full? When you begin to overheat turn the cab heat on high. Using the cab heater will dump some heat from your engine in the cab.
Getting back on topic, about your fuel solenoid now. I do recall that ED Rather (MWrench) worked on your solenoid at the Milford 2014 Get together. I am sure ED will reply as soon as he reads about your difficulties. .
06-23-2018, 08:57 AM
Dana
quote:
Originally posted by Kevin:
When I cracked it .


When he cranked it!

Richard is running again and continuing on his trip.


Dana & Lynn
1997 38ft Monarch front entry
Spartan Mountain Master Chassis
Cummins 8.3 325hp
Allison MD-3060 6 speed
22.5 11R
Cummins Factory Exhaust Brake
8000 watt Quiet Diesel Generator
9608-M0022-38MI-4C
Christened Midnight

1972 22ft
72081169MC22C
Christened Camp Barth
06-23-2018, 09:09 AM
Kevin
Thanks Dana! I can usually think outside the box. I had no idea of what he cracked. There appears to be another following of this subject here also. Maybe Richard had tired eyes or excessive beverage consumption.
Glad you could help Richard along his trip. Many thanks to all that pitch in here with help.
07-08-2018, 07:01 PM
kenny j
So what ended up happening? Dana, what advice did you give? Richard, how is it running now? Inquiring minds would like to know.
Thanks kenny
07-08-2018, 08:18 PM
Kevin
quote:
Originally posted by kenny j:
So what ended up happening? Dana, what advice did you give? Richard, how is it running now? Inquiring minds would like to know.
Thanks kenny
THANK YOU KENNY Thumbs Up There is more conversation on this topic found here. Neither of the topics have an end.
07-08-2018, 10:04 PM
Dana
quote:
Originally posted by kenny j:
So what ended up happening? Dana, what advice did you give? Richard, how is it running now? Inquiring minds would like to know.
Thanks kenny


Kenny I just got him on the phone and told him what he was looking for and how and where to see it from. Once he knew what and where he had Nancy crank it as he had his hand on it so he could tell if it was moving. She cranked and it fired right up and he now knew where at what it should do. I told him to wait to replace until he had more info. ie it wouldn't start?


Dana & Lynn
1997 38ft Monarch front entry
Spartan Mountain Master Chassis
Cummins 8.3 325hp
Allison MD-3060 6 speed
22.5 11R
Cummins Factory Exhaust Brake
8000 watt Quiet Diesel Generator
9608-M0022-38MI-4C
Christened Midnight

1972 22ft
72081169MC22C
Christened Camp Barth