Start A New Topic
Reply To This Topic
I am looking for a circuit board for a Dometic 7000 watt generator. Anyone have any idea where I might find one.
Darryl, Pull out the circuit board and look on it for some part numbers. Use the part numbers in a Google search.
i need one too if u find were to get one let me know i looked high and low i looked in china, ebay craigs list mine is a propane gen. im not getting any power to the starter i took the starter out and checked it its good anyway let me know
You can also re-wire the gen set to eliminate the circuit board altogether using relays and sensors for your safety circuits.
Circuit boards are only good for profits.
1990 34 Regency WB
1993 34 Regency WB
8.3 Cummins 300HP
You might have better results if you look for parts of a GENERAC 7000 Generator, of which there are several "Models". Generac made the Dometic 3000. There is NO Dometic 7000 generator on Google.
Gen ON ! Lou, FMC #120
Darryl what does your generator do, or not do? The only source I had a few years ago has changed owners and all spare parts (and they had a lot)were scrapped!
The main power switch will fail and the generator will start but will not stay running. The control box is in the worst possible location! Connectors will also get crudded up and need a cleaning with contact cleaner.
94 30' Breakaway #3864
30-BS-6B side entry
230 Cummins, Allison 6 speed
The generator was running fine when I shut it down. Next morning it would turn over but not start. After a day of trying to start it once in a while the remote start switch on the dash quit working. I tried the start switch on the generator and it cranked for two tries then it quit working also. Repair shop says switch is sending juice to circuit board but no juice to starter motor.
|Powered by Social Strata|