Forums    Barth Upgrades and Improvements    Assist Handle Replacement Light
Go to...
Start A New Topic
Search
Notify
Tools
Reply To This Topic
  
Assist Handle Replacement Light
 Login now/Join our community
 
Picture of Doug Smiley
posted
http://www.rvshop.com/Assist-H...t-Light_p_72559.html


_________________________

The 82 MCC {by Barth}
is not an rv--
it is a Motor Coach!!

 
Posts: 2060 | Location: Nova Scotia | Member Since: 12-08-2006Reply With QuoteReport This Post
Supporting Member of Barthmobile.com 9/16
Picture of Quinn
posted Hide Post
I had no idea those were available! Does anyone know if this is the replacement handle?
http://www.rvshop.com/Lighted-...Handle-_p_72562.html


89 28' Regal
Quad Bunks
P-30 454
8906-3623-28C-B
 
Posts: 252 | Location: San Leandro, California | Member Since: 08-06-2014Reply With QuoteReport This Post
Picture of Sloop John B
posted Hide Post
That's the one. you can have it engraved with the BARTH letters. All who wander are not lost. cheers


JKB

88 28' Regal 454
Blue/Silver metalflake
 
Posts: 749 | Location: 103 miles west of Milford & 1.75 Miles from Lincoln oasis on I-80 | Member Since: 01-05-2005Reply With QuoteReport This Post
Supporting Member of Barthmobile.com 9/16
Picture of Quinn
posted Hide Post
Mine is a little crackily, but works. However, the hours of tail light research I did on this site this week to no avail makes me feel like I should strike while the iron's hot (and I have a little money). By the time mine gives out (the light or the money), they could be obsolete!


89 28' Regal
Quad Bunks
P-30 454
8906-3623-28C-B
 
Posts: 252 | Location: San Leandro, California | Member Since: 08-06-2014Reply With QuoteReport This Post
Supporting Member of Barthmobile.com 2/16
Captain Doom
Picture of Rusty
posted Hide Post
Better price here: http://www.flemingsalesoem.com/britebars/

You'll want Item 1000-12P, 12⅛" Plastic Bar only - PRSN "Bar Only - Old Curved"


Rusty


MilSpec AMG 6.5L TD 230HP; built-to-order by Peninsular Engines:  Hi-pop injectors, gear-driven camshaft, non-waste-gated, high-output turbo, 18:1 pistons.  Fuel economy increased by 15-20%, power, WOW!"StaRV II"

'94 28' Breakaway: MilSpec AMG 6.5L TD 230HP

Nelson and Chester, not-spoiled Golden Retrievers

Sometimes I think we're alone in the universe, and sometimes I think we're not.
In either case the idea is quite staggering.
- Arthur C. Clarke

It was a woman who drove me to drink, and I've been searching thirty years to find her and thank her - W. C. Fields
 
Posts: 8200 | Location: Brooker, FL, USA | Member Since: 09-08-2005Reply With QuoteReport This Post
Supporting Member of Barthmobile.com 9/16
Picture of Quinn
posted Hide Post
ACK! I already ordered. head bang

However, there is no 1000-12P on the page, or anything with "PRSN" in the description. For the next schmoe, which one did you mean?


89 28' Regal
Quad Bunks
P-30 454
8906-3623-28C-B
 
Posts: 252 | Location: San Leandro, California | Member Since: 08-06-2014Reply With QuoteReport This Post
Supporting Member of Barthmobile.com 3/13
Picture of Dana
posted Hide Post
This is one easy do it yourself one if anyone wants to try. I know Billy-t bought one on the auction at Milford last year. I thought Sloop or maybe it was Doorman bought the other one. I made 4 because it was cheaper to buy a 48 piece and make 4 than to order one. Cut to length polished the ends and then heated in the oven. When hot it is a fairly easy bend. I kept one as a spare (Ask Ed[MWRENCH] when a new one might be needed) Sorry . and sold the others on the Barth Auction. I researched bending acrylic rod on the net!


Dana & Lynn
1994 34ft Side Entry Aristocrat
Christened - DBarth
Spartan Chassis
6BTA 5.9L 230hp Cummins
Allison MD-3060 6 speed
15040S Eaton rear
Banks PowerPack
PacBrake
ProSine 2.5 Watt Inverter/Charger
245 watts solar panels
Blue Sky 3000i
#3895
1972 22ft
Christened Camp Barth
No motor, no tranny, no running water
Electric 110 and 12 volt intact and running
Still mobile as a toad with newer brakes, tires and lights
Original Fridgeking Air conditioner
 
Posts: 623 | Location: Waseca, Minnesota | Member Since: 12-09-2010Reply With QuoteReport This Post
Supporting Member of Barthmobile.com 10/08
Picture of MWrench
posted Hide Post
Yes Dana I need a handle. Been looking but did not do anything yet.

By the way here is the link to the fuel shut off solenoids.

Whoops the link has been shut off, just google fuel shut off solenoid on Ebay and then you will see the selection. I used the model for the Cummins '94 engine.


Ed
94 30' Breakaway #3864
30-BS-6B side entry
230 Cummins, Allison 6 speed
Spartan chassis
K9DVC
 
Posts: 1893 | Location: Los Gatos, CA | Member Since: 12-08-2005Reply With QuoteReport This Post
Picture of Doug Smiley
posted Hide Post
quote:
fuel shut off solenoid


>> http://www.ebay.com/bhp/fuel-shutoff-solenoid


_________________________

The 82 MCC {by Barth}
is not an rv--
it is a Motor Coach!!

 
Posts: 2060 | Location: Nova Scotia | Member Since: 12-08-2006Reply With QuoteReport This Post
Supporting Member of Barthmobile.com 3/13
Picture of Dana
posted Hide Post
Ed
The Fleming site Rusty has listed is OEM and the best prices I've seen. I actually ordered the gaskets. You know how tight I am that is why I made my own handle because the brackets were good. I had fun and because it had been replaced with a piece of stainless tubing. I bent and rebent trying to find find the magic curves. All 4 I made would work and looked good. Put in a blue led. (House of Blue Lights by Asleep at the Wheel!) Looks sexy!


Dana & Lynn
1994 34ft Side Entry Aristocrat
Christened - DBarth
Spartan Chassis
6BTA 5.9L 230hp Cummins
Allison MD-3060 6 speed
15040S Eaton rear
Banks PowerPack
PacBrake
ProSine 2.5 Watt Inverter/Charger
245 watts solar panels
Blue Sky 3000i
#3895
1972 22ft
Christened Camp Barth
No motor, no tranny, no running water
Electric 110 and 12 volt intact and running
Still mobile as a toad with newer brakes, tires and lights
Original Fridgeking Air conditioner
 
Posts: 623 | Location: Waseca, Minnesota | Member Since: 12-09-2010Reply With QuoteReport This Post
Supporting Member of Barthmobile.com 10/08
Picture of MWrench
posted Hide Post
Dana I just picked up a piece of 1 inch acrylic plastic solid rod. I will do like you did, roll my own. haven't figured out yet what the right shape is as mine was ripped off and in lots of pieces. Not sure if i will get this done before I leave for Texas or not. My brackets are fine also.

I will also replace the light with LED like you did.


Ed
94 30' Breakaway #3864
30-BS-6B side entry
230 Cummins, Allison 6 speed
Spartan chassis
K9DVC
 
Posts: 1893 | Location: Los Gatos, CA | Member Since: 12-08-2005Reply With QuoteReport This Post
  Powered by Social Strata  
 

    Forums    Barth Upgrades and Improvements    Assist Handle Replacement Light

This website is dedicated to the Barth Custom Coach, their owners and those who admire this American made, quality crafted, motor coach.
We are committed to the history, preservation and restoration of the Barth Custom Coach.