Forums    Barth Upgrades and Improvements    replace Bargman latch/lock
Go to...
Start A New Topic
Search
Notify
Tools
Reply To This Topic
  
replace Bargman latch/lock
 Login now/Join our community
 
Picture of Keith Hopper
posted
http://i687.photobucket.com/al...Uploads/IMG_2215.jpg

http://i687.photobucket.com/al...Uploads/IMG_2216.jpg

Anybody replace door latch/lock lately?

Numbers:

10-30-051
10-30-010




1988 Regency
38' Gillig
3208 T Cat
 
Posts: 161 | Location: Atlanta, Georgia | Member Since: 03-21-2008Reply With QuoteReport This Post
Supporting Member of Barthmobile.com 7/17
Picture of Doorman
posted Hide Post
EBAY


1986 31' Regal -1976 Class C
454/T400 P30 -350/T400 G30
twin cntr beds - 21' rear bath
 
Posts: 1026 | Location: Dayton, Ohio | Member Since: 09-27-2009Reply With QuoteReport This Post
Supporting Member of Barthmobile.com 2/10
Picture of bud@YXY
posted Hide Post
I did not see in the pictures what the reason for replacement is.

Bud


1993 Breakaway 36ft & 1977 20 ft
Spartan: air ride and brakes & P32(?)
Cummins: 8.3 litre 250hp, PACBrake
Allison 3060 (6 spd)
Front entry, side hallway
7.5 kw diesel gen.
1999 2dr Tracker 4X4 5spd, SMI Braking system
 
Posts: 253 | Location: Yukon--Arizona and around | Member Since: 06-09-2006Reply With QuoteReport This Post
Picture of Keith Hopper
posted Hide Post
Worn out I think. Outside latch half open. Inside latch falls down. Likes to lock me in.




1988 Regency
38' Gillig
3208 T Cat
 
Posts: 161 | Location: Atlanta, Georgia | Member Since: 03-21-2008Reply With QuoteReport This Post
Supporting Member of Barthmobile.com 7/17
Picture of Doorman
posted Hide Post
From the photo I can't see any worn parts. I would clean it with some brake cleaner let it dry and lubricate every thing with some spray can white lithium grease. It will spay out a little thin then thicken up.

Make sure you frame strike is aligned properly. If it doesn't let the latch bolt drop in it cause the handle to be loose. Make sure the area between the cam and plate are well lubricated.


1986 31' Regal -1976 Class C
454/T400 P30 -350/T400 G30
twin cntr beds - 21' rear bath
 
Posts: 1026 | Location: Dayton, Ohio | Member Since: 09-27-2009Reply With QuoteReport This Post
Picture of Keith Hopper
posted Hide Post
Will give this a try. Cheaper than a new lock ($300.00).

Should the frame strike be adjustable?




1988 Regency
38' Gillig
3208 T Cat
 
Posts: 161 | Location: Atlanta, Georgia | Member Since: 03-21-2008Reply With QuoteReport This Post
Supporting Member of Barthmobile.com 2/10
Picture of bud@YXY
posted Hide Post
Keith
I have found that our handles will be loose if the latch is not fully ingaging behind the door latch/striker(??). Have also found that the little compression springs get weak--- we will be looking for replacements this fall.

Bud


1993 Breakaway 36ft & 1977 20 ft
Spartan: air ride and brakes & P32(?)
Cummins: 8.3 litre 250hp, PACBrake
Allison 3060 (6 spd)
Front entry, side hallway
7.5 kw diesel gen.
1999 2dr Tracker 4X4 5spd, SMI Braking system
 
Posts: 253 | Location: Yukon--Arizona and around | Member Since: 06-09-2006Reply With QuoteReport This Post
Supporting Member of Barthmobile.com 7/17
Picture of Doorman
posted Hide Post
quote:

Should the frame strike be adjustable?


Should be able to adjust strike. I have a dead bolt on ours so I don't use this one for security.


1986 31' Regal -1976 Class C
454/T400 P30 -350/T400 G30
twin cntr beds - 21' rear bath
 
Posts: 1026 | Location: Dayton, Ohio | Member Since: 09-27-2009Reply With QuoteReport This Post
posted Hide Post
I replaced mine on my '95 Barth Soverign last week with the Trimark lock set. It was about $100.00

I returned the Bauer lock set because the Trimark was a far better lock.

Mark
 
Posts: 29 | Location: Cincinnati | Member Since: 08-29-2014Reply With QuoteReport This Post
Supporting Member of Barthmobile.com 5/12
Picture of RainCatcher
posted Hide Post
quote:
I replaced mine on my '95 Barth Soverign last week with the Trimark lock set


Do you have a link to this item? Does it fit in the same hole as the BARGMAN latch?


"Keep On Truckin"
94 30' Breakaway #3866
5.9 cummins on spartan chassis
 
Posts: 206 | Location: Seattle | Member Since: 04-22-2012Reply With QuoteReport This Post
posted Hide Post
I just bought it from our new local Camping World. If your lock has the two Pins, and the dead bolt is on the top, then it should work.

They do make a left and right hand lock.

My door hinges are on the right, and the lock is on the left side of the door.

Mark
 
Posts: 29 | Location: Cincinnati | Member Since: 08-29-2014Reply With QuoteReport This Post
Picture of Keith Hopper
posted Hide Post
Are you happy with the Trimark lock?




1988 Regency
38' Gillig
3208 T Cat
 
Posts: 161 | Location: Atlanta, Georgia | Member Since: 03-21-2008Reply With QuoteReport This Post
posted Hide Post
Yes, much happier with the Trimark Lock...it is much more secure, and much better made from what I could tell.

It does have 2 separate keys, one for the latch, and one for the deadbolt.

I was thinking about an automatic remote lock, but I would have to take my door apart for that, and the Bauer keypad lock is just china junk.

BR, Mark
 
Posts: 29 | Location: Cincinnati | Member Since: 08-29-2014Reply With QuoteReport This Post
Picture of Doug Smiley
posted Hide Post
Quote: much happier with the Trimark Lock..

>>>>>> http://trimarklocks.com/

>>> http://trimarklocks.com/entry.htm

>>>>> http://www.ebay.com/sch/i.html?_nkw=trimark+60-650

>>>> http://trimarklocks.com/baggage.htm


_________________________

The 82 MCC {by Barth}
is not an rv--
it is a Motor Coach!!


 
Posts: 2587 | Location: Nova Scotia | Member Since: 12-08-2006Reply With QuoteReport This Post
  Powered by Social Strata  
 

    Forums    Barth Upgrades and Improvements    replace Bargman latch/lock

This website is dedicated to the Barth Custom Coach, their owners and those who admire this American made, quality crafted, motor coach.
We are committed to the history, preservation and restoration of the Barth Custom Coach.